Technical Specifications

ValVue Digital Communications Software Ver. 2.80

GE Oil & Gas

$$SWRev Software Revision

$$CmdRev Firmware Command Revision

$$PollingAddress PollingAddress

$$Position Position

$$Signal Input Signal

$$Pressure Actuator Pressure

$$IPOutput Signal to the I/P in Counts (0 - 65000)

$$Temperature Circuit Board Temperature

$$LowTemperature Historical Low Temperature

$$HighTemperature Historical High Temperature

$$Output Output from the process controller

$$Mode SVI II AP Mode

$$SignalPercent Input Signal as Percent

$$AirAction Air-to-Open/Air-to-Close

$$ActuatorType Single/Double Acting Actuator

$$PosErrorBand Position Error Band

$$PosErrorTime Position Deviation Time

$$Charact Characterization (Linear, Equal Percentage, etc.)

$$CustomCharact Displays the Custom Characterization constants

Individual items of the characterization curve may be selected by enter-

ing:

$$CustomCharact[n] - where n is a number between 0 and 17

$$ButtonLock Button Lock Level

$$Bumpless Bumpless Transfer On/Off

$$BumplessSpeed Time to move from Manual to Normal (operating) mode

$$TightShutoff Tight Shutoff On/Off

$$TSValue Tight Shutoff Value

Table 5 Report Setup Parameters (Continued)

Report Parameter Information Provided in Report