Technical Specifications

ValVue Digital Communications Software Ver. 2.80
654
GE Oil & Gas
Check Tab
Use the Check tab to monitor some of the basic parameters. This tab is used primarily for
troubleshooting.
Figure 20 Check Tab
Fields
Current The value of the input signal in
milliamps.
Board Temperature The internal SVI 2 temperature measured in degrees Celsius. The SVI2 also
reports th
e lowest temperature and highest temperature in which it has
been operating.
I/P The current D/A values being sent to the I/P that controls the valve
position. This value is used for troubleshooting. The D/A value sent to
the I/P can be set directly fer testing by using the Set I/P edit box and
menu command.
Raw Position
The A/D values measured from t he position sensor. This is used for trou-
bleshooting
purposes.