Technical Specifications

603
Menu -Status Tab
SOFTWARE_ERROR An inconsistency has been detected within the SVI.
RESET_OCCURRED A reset has occurred either because of a power interruption or
because of an external request for reset.
DATA_OVERRUN The SVI is not processing acquired data.
INTERNAL_TEMP_ERROR Internal temperature of the SVI is above or below the rated tem-
perature.
EEPROM_WRITE_FAILED A write to the SVI’s internal memory failed.
FIND_STOPS_FAILED The calibration procedure for position failed to find reasonable val-
ues.
CALIBRATE FAILED An attempt to run find stops or autotune failed.
STANDARD DIAGNOSTICS
FAILED
Running the standard diagnostic failed to complete.
Menu -Status Tab
 Report Setup -Allows you to select a report file and a report printing program.
 Report- Generates a report of the SVI parameters.
 Detach Trend- Removes the Trend display from the tabbed dialog and creates a
separate display.
 Help- Displays the help file at the Controller Monitor tab instructions.