Technical Specifications

ValVue Digital Communications Software Ver. 2.80
598
GE Oil & Gas
$$Mode - SVI mode
$$ControllerModeSP - Local/Remote
$$ControllerModePV - Real/Simulated process variable
$$SignalPercent - Input signal as percent
$$AirAction - Air-to-open/Air-to-close
$$ActuatorType - Single/double acting actuator
$$ControllerSwitch - Controller on/off
$$DirectReverse - Direct or reverse positioner
$$ReverseType - Software or hardware reverse
$$FailDirection - Fail to low/high I/P signal
$$PosErrorBand - Position error band
$$PosErrorTime - Time until position error
$$PosErrorFailtime - Time until position error produces failsafe action
$$Charact - Characterization (linear, equal percentage, etc.)
$$CustomCharact - Displays the custom characterization constants
$$ButtonLock - Button lock level
$$Bumpless - Bumpless Transfer on/off
$$TightShutoff - Tight shutoff on/off
$$TSValue - Tight shutoff value
$$ULimitStop - Upper position limit on/off
$$ULSValue - Upper position limit
$$LLimitStop - Lower position limit on/off
$$LLSValue - Lower position limit
$$NearClosed - Value below which is considered near closed
$$PresUnits - Pressure units of measure
$$PosUnits - Position units of measure (always %)
$$Language - SVI display language
$$LowSignal - Low calibration value
$$HighSignal - High calibration value
$$HighPres - Pressure calibration value
$$P - Proportional gain in positioner
$$Padjust - gain adjustment of positioner