Technical Specifications

539
Menu - Configure
Failsafe Current If Failsafe Current is not selected and the HDLT goes to failsafe
mode, the current remains at the last current value sent before the
failsafe mode activation.
If Failsafe Current is selected and the HDLT goes to failsafe, the cur-
rent is set to the value entered in the edit box.
The Failsafe Current values must be between 3.6 to 23 mA.
Apply Sends all of the changes made to entries on the tab immediately to
the DLT.
Menu - Configure
When you right-click on any of the Configuration tabs, a context menu appears. The items
that appear depend on the HDLT mode:
 Report Setup - Allows you to select a report file and a report printing program.
 Report - Generates a report of the HDLT parameters.
 Detach Trend - Removes the Trend display from the tabbed dialog and creates a
separate trend display.
 Help - Displays the help file at the Monitor tab instructions.