Technical Specifications

505
8
Status
Status Screen: General
Use the Device Status screen to see the VECTOR operating and internal status. The tab is divided
into a series of tabs that provide status, alarm, and fault information in a graphical form for all
aspects of the system.
Each alarm condition is color coded according to the criticality of the alarm:
 Red indicates an alarm (fault) has occurred
 Green indicates no faults
On each screen the Configure Change Count field indicates the number of times the device
configuration or calibration has been changed by a host application or from a local operator
interface.
The Status screen is split into eight subtabs:

“Active Faults” on page 506  “Device_Status” on page 507
 “IO_and_Subdevice_Status” on
page 508
 “Ext_Device_Status” on page 509
 “WirelessHART_Status” on page 510  “Device_Diagnostic_Status_0” on
page 511
 “Device_Specific_Status_0” on page 512  “Device_Specific_Status_1” on page 513