Technical Specifications

ValVue Digital Communications Software Ver. 2.80
502
GE Oil & Gas
Buttons and Fields
Maintenance Tab Tools and Context Menu
Update Configured Data
Available on the Tools menu only.
Use this command to upload device data to ValVue VECTOR to synchronize the two.
To do this:
1. Use the right click or tools menu and select Update Configured Data and appears.
Figure 315 Update Configured Data
2. Click Yes.
Master Reset button Click to reset the VECTOR.
Self Test button Click to perform a limited VECTOR self test.
The adapter performs continuous self tests as it operates. The self test forces all of
the status bits to read new values and update the device status / alert data.
Factory Reset button Click to reset the VECTOR to factory default values.
Disconnect the
Device from the Net-
work button
Click to disconnect the wireless device from the
network.
Advertise to New
Devices button
Click to send this wireless device’s data to the network
for recognition by other devices.