Technical Specifications

ValVue Digital Communications Software Ver. 2.80
486
GE Oil & Gas
Automatic
Commands
Use the pull down to select from the preconfigured commands for use. The
commands include a command (s) sent to the sub-device and a set of two
commands sent to the VECTOR:

Sub-device: Cmd3, VECTOR Cmd3 & Cmd 48
 Sub-device: Cmd3, VECTOR Cmd9 & Cmd 48
 Sub-device: Cmd3 & Cmd 48, VECTOR Cmd3 & Cmd 48
 Sub-device: Cmd3 & Cmd 48, VECTOR Cmd9 & Cmd 48
Mode
Use the pulldown to enable or disable manual burst mode.
Subdevice Tag
Use this pulldown to assign the long tag to the burst configuration or to
leave it unassigned.