Technical Specifications

467
Run Setup Wizard
Setup Wizard
Run Setup Wizard
To run the Setup Wizard:
1. Click and Figure 296 appears.
2. Enter text into the Tag, Long Tag, Descriptor and Message field, as required.
3. Click Configure Power Mode and use the Power Mode pulldown to select a setting.
4. Click Join Device to Network and enter a Network ID and the four Join Keys
5. Click and a dialog appears, Figure 297, listing the items for execution.
Figure 297 Setup Wizard Selected Items
6. Click OK and the tasks are completed and Setup Wizard Complete appears. If Report &
Backup is selected a dialog appears; click OK.