Technical Specifications

ValVue Digital Communications Software Ver. 2.80
450
GE Oil & Gas
Buttons and Fields
ValVue is the main interface for connected devices. Once a connected
device is selected the VECTOR software launches.
Tag fields
 Tag
 Long Tag
 Descriptor
 Message
 Date
 Assembly Number
This data can be changed on the “Setup Wizard Screen” on
page 465 and in “Configure Adapter Info Tab” on page 495.
Adapter Status

PV Loop Current: Displays the detected loop current.
 PV: Displays the process variable.
 Direct Power Voltage: Displays the voltage if the device is con-
figured for direct voltage.
 Electronics Temperature: Displays the board temperature
detected by the device.
 Device Status: Displays the device status as text and in a col-
ored status bar, where:
 Green means the connection is good.
 Red means the connection is bad.
 Wireless Status: Displays the status of the wireless
connection, some of which include Idle, Searching, Joining,
Operational and Join Failed. LED color indicates:
 Green means the join succeeded.
 Red means the join failed.
 Beige means the process is idle or in the process of
searching or joining.
Send Cmd button Click to make a request for the display of various
system data in the box below.
Status The VECTOR tracks operation and provides several health indica-
tors. When there is a fault code available in the VECTOR, this box
contains Additional Status Available. The LED is gray for OK or red
when a flag is set.
4