Technical Specifications

367
7
Advanced Setup
What you can do on the Advanced Setup Screen
On the Advanced Setup screen you can:
 Configure the “Local User Interface” on page 368
 “SG Meter Calibration” on page 370
 Set Alarm parameters ( “Alarm” on page 374)
 Set “DO Switches” on page 379
 Set the Reduced Signal “Range” on page 376
 Access Database function to save Displacer/Torque parameters ( “Database” on
page 382)
 Access Filters and Tuning function to set Filter and Damping Time parameters ( “Filters
and Tuning” on page 395)
 Access Calibration Tools to calibrate Primary and secondary Signal output currents (
“Calibration Tools” on page 403)
 “Set SIL2 Settings” on page 373
 Activate the 12400 PID features by clicking Controller Activation, which enables the
“Controller Monitor” on page 303 and the “Controller Setup” on page 335 screens. To
make any changes on the Advanced Setup screen, ValVue 12400 must be in Setup mode.
 Activate the Torque Tube Compensation features by clicking TT Activation. Click Process
Temperature and enter a temperature at which you are targeting the process to operate.