Technical Specifications

ValVue Digital Communications Software Ver. 2.80
340
GE Oil & Gas
Setpoint Unit Use the pulldown to select the unit for use in the program:
 %
 mm
 cm
 m
 liter
 m3
 inch
 feet
 Cu-in
 Cu-ft
 kg
 g
 pound
If the setpoint units do not match the level units, the Ratio Control Activation automati-
cally activates.
Setpoint
Tracking
Click to enable setpoint tracking. When enabled, if the controller is changed from man-
ual mode to normal mode, the setpoint is set equal to the current process variable.
Ratio
Control
Activation
Self-enables when setpoint and level engineering units do not match to have the pro-
gram perform calculations to compensate.
Ratio Gain Enter the gain coefficient to convert controller setpoint process variable units.
Ratio Bias
(%)
Enter the bias coefficient to convert controller setpoint process variable units.