Technical Specifications

339
PID Controller Setpoint Range
Controller Setup
PID Controller Setpoint Range
Use this section to configure setpoint values while in setup mode.
Figure 131 Controller Setpoint Range
Parameters include:
Low
Setpoint
Value
Enter the desired lowest controller setpoint value. The value can fall below this as in Low
Setpoint Limit. This limit must be within 10% of the Lower Controller Alarm value.
High
Setpoint
Value
Enter the desired highest controller setpoint value. The value can go above this as in High
Setpoint Limit. This limit must be within 10% of the Higher Controller Alarm value.
Initial
Setpoint
Value
Enter the value for the power up controller setpoint.
Low
Setpoint
Limit
Enter the lowest allowable controller setpoint value.
High
Setpoint
Limit
Enter the highest allowable controller setpoint value.