Technical Specifications

ValVue Digital Communications Software Ver. 2.80
30
GE Oil & Gas
Starting ValVue
The ValVue program provides a Windows based interface that can operate, configure,
calibrate, and diagnose positioners and controllers. ValVue can also communicate with other
HART devices at a basic level (using HART Universal Commands) as well. To communicate with
a
positioner, you need to connect the device to the computer RS-232 serial port through a
HART modem, or through an MTL multiplexor and an RS232-485 converter. When there is no
connected HART device, ValVue allows you to run offline with a simulated
positioner.
ValVue provides an on-line help utility that provides information on how to use functions of
the
positioner with ValVue. To access the help utility, select the appropriate Help from the Help
menu in various ValVue screens. After completing the hardware connections, communication
with a
positioner can begin.
Always return control of the device to the control system before ending a ValVue
communications session. If communications to the
positioner are interrupted by a computer
system failure, if Windows stops responding, always reboot the computer and return control
to the control system before ending the ValVue communication session
To start ValVue
 Double-click on the ValVue icon.
or
 Select Start > Programs > Dresser > ValVue > ValVue.
Registering ValVue
When you start ValVue for the first time the registration window launches. ValVue software
must be registered to activate the permanent installation. ValVue can be used without
registration for 60 days. Registration allows the factory to keep track of all of ValVue users so
that we can notify you of any changes or important information about new software features
and updates. A registration card is included with the installation CD.
The software package contains a serial number. Keep a record of the serial number in a secure
location. Do not discard the registration card. To register your software, you must launch
ValVue to obtain an installation ID number, then contact the factory by mail, telephone, email
or Fax, and provide your name, company’s name, contact information, the CD-ROM serial
number, and the installation ID number from the ValVue login display. Contact information is
provided on the registration card that is part of the software package.
Your serial number is located on the ValVue package and on the enclosed sticker. Place the
serial number sticker on the detachable card included with the Registration Instruction card
and store the card in a secure location. You need the serial number to move ValVue to a
different computer.