Technical Specifications

279
Checking Switch Operation
Checking Switch Operation
ValVue Commands
This procedure gives an example, using the settings in Figure 70, to see if a switch is
operating:
1. Click the Configure tab, click and Figure 70 appears.
Figure 70 I/O Configure
2. Switch from Normally Opened to Normally Closed or vice versa, click OK and Apply
Changes.
3. Click the Check tab.
4. Select Command 142 Read Switches from the pulldown list and click Send Cmd.
The information field below populates with the configured switch states.
Ensure that the switch just reconfigured has changed state.