Technical Specifications

179
Supported HART Modems
References
Title
ValVue HART 2.80.0 Family Software
Technical Release Notes.doc
No.

Revision
A
Date
6/
14/2012
Author
Sean Kong
Check
Luke Tao/Terry Zuo
Approv
Henry Du
Page
10
of
13
Copyright 2009 as an unpublished trade secret; this document and all information therein is the property of Dresser, Inc. It is confidential and must not be made public or
copied and is subject to return on demand. This document and/or technology exported from the United States, or the originating country of this export, must be in
accordance with the U.S. Export Administration Regulations and/or originating jurisdiction Export Regulations. Diversion (export, re-export, transfer, sale, review, use,
disclosure, or distribution) contrary to such law(s) is prohibited. This prohibition includes no diversion to current U.S. sanctioned countries; plus any additional
sanctioned country of the originating country of this transaction if not the United States.
VII. Known Issues
x If you load a DGN file that was created with ValVue2.50 or before, you have to make sure the current
ValVue has the same the pressure unit same as it in DGN file, an then you will get the same diagnostic
result as before.
x After having done a standard actuator signature, you can’t change the pressure unit before you save it
with DGN format file (if you want to save it). It is because that the pressure unit change can’t influence
the result from COMMAND191 and COMMAND192 at the same time.
x For ValVue SVI2AP with FDM connection, the hart command "038 Reset Configuration Changed" does
not work.
x FDM build network can't find 12400 devices with burst mode is on
x When ValVue connects to device through P+F WirelessHART Gateway communication, system
performance may be slow.
x Sometimes ValVue SVi1000 or ValVue SVI2AP processes may still remain after application is
terminated. Task Manager is needed to kill it manually.