MSDS

Material Safety Data Sheet
Version: 1.1
04/28/2011
M90033 12C
Sealant
Page 3/7
SENSITIVITY TO STATIC DISCHARGE
Sensitivity to static discharge is not expected.
EXTINGUISHING MEDIA
Foam., Dry chemical., Carbon Dioxide., Water Spray or Fog.
SPECIAL FIRE FIGHTING PROCEDURES
Firefighters must wear NIOSH/MSHA approved positive pressure self-contained breathing
apparatus with full face mask and full protective clothing.
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking surfaces
with detergent and water to reduce slipping hazard. Wear proper protective equipment as specified in
the protective equipment section.
7. HANDLING AND STORAGE
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORAGE
CAUTION! Avoid contact with skin and eyes. Use only in well-ventilated areas. Eye irritation on contact
with the uncured product. Remove contact lenses before using sealant. Do not handle lenses until all
sealant has been cleaned from the finger and hands. Residual sealant may remain on fingers for
several days and transfer to lenses, resulting in eye irritation.
8. EXPOSURE CONTROLS/PERSONAL PROTECTION
ENGINEERING CONTROLS
Eye wash facilities and emergency shower must be available when handling this product.
RESPIRATORY PROTECTION
If exposure limits are exceeded or respiratory irritation is experienced, NIOSH/MSHA approved
respiratory protection should be worn. Supplied air respirators may be required for non-routine or
emergency situations. Respiratory protection must be provided in accordance with OSHA regulations
(see 29CFR 1910.134).