Installation Guide

Red stripe (+)
White (-)
Power Supply
AC line
Red (+)
Black or blue (-)
Connect modules together using twist-on wire connectors
or in-line (IDC) connectors. Join white wires together and
red striped wires together.
NOTE: Additional supply wire may be necessary to bridge
electrical connections.
Wire AC line to LED driver(s) in accordance with the
applicable local, state, and country electrical codes.
Connect black to black or brown, white to white or
blue, and green to green using 18 AWG (0.82mm
2
) wire
connectors. Reattach wire cover to power supply.
Cap all exposed wires with appropriate end caps
or apply electric grade (non-corrosive) silicone for
additional weather protection.
Connect the red stripe wire (+) from the rst module to the
red wire (+) of the power supply. Connect the white wire (-)
from the rst module to the black or blue wire (-) of the
power supply.
1
3
2
4
Electrical Connections
Red stripe (+)
White (-)
Push both ends of the mounting rail into existing
uorescent lamp holders.
Continue installing Line Fit Light modules.
4 5