Installation Guide

Installation Instructions (cont’d)
RG4 Level Crossing LED Signal Modules
This product is intended solely for the use of rail signaling and is not intended for use in any other
applications
NOTE: If you prefer to have this Installation
Instructions document in other languages, visit our
official website at: www.gelighting.com/installation
Voltage Rating
Up arrow ()
Risk of Electric Shock
Install unit in enclosure tested to
be suitable for wet locations only.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3 • or • +1.2 16 . 26 6 .2 4 19
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory
conditions.
RAIL248- R130816