Installation Guide

Installation Instructions (cont’d)
RG6 Pixelated LED Signals – 12’’ (300mm) – Railway Grade Crossing
This product is intended solely for the use of rail signaling and is not intended for use in any other applications
NOTE: If you prefer to have this Installation
Instructions document in other languages, visit our
official website at: www.gelighting.com/installation
(B)
(A)
Check label for required
voltage
Ensure arrow ‘’’’ points
upward for proper beam
alignment
Risk of Electric Shock
Install unit in enclosure tested
to be suitable for wet locations
only.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3 • or • +1.21 6 . 266 . 2 4 19
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. The GE brand and logo are trademarks of the General Electric Company.
© 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory
conditions.
RAIL135- R130816