Manualshelf

Specification

ManualsBrandsGE ManualsAppliances30 in. Single Smart Convection Wall Oven with No-Preheat Air Fry in Stainless Steel
123
DIMENSIONS AND INSTALLATION INFORMATION
JTS5000DV/EV/SV
GE® 30" Smart Built-In Self-Clean Convection
Single Wall Oven with Never Scrub Racks
For answers to your GE Profile™ or GE Appliances product questions,
visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.
Specification Revised 11/23
Listed by
Underwriters
Laboratories
ADA
COMPLIANT
NOTE: Single wall ovens are NOT approved for
stacking above or below another single wall oven.
NOTE: Wall coverings, countertops and cabinets
surrounding the wall oven must be able to
withstand a temperature of up to 200°F (94°C).
NOTE: If the cabinet in which the wall oven is
installed does not have a solid bottom, two braces
or runners must be installed to support the weight
of the oven. The runners and braces must support
up to 220 lbs (99 kg).
NOTE: Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
with the handle.
ATTENTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with
product for current dimensional data.
KW RATING
240V 4.2
208V 3.2
BREAKER SIZE
240V 20 Amps
208V 20 Amps
Cabinet
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 11/16"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 27-1/4" to 27-5/8"
F - Overall width 28-1/2" to 28-5/8"
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
22" to
bottom of
junction box
Junction box
location
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout
B - Overlap of oven other side of edge of cutout
C - Overlap of oven at bottom of cutout
Oven
D - Install depth
E - Overall height with trim
F - Overall width
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom of cutout
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Cutout depth
23-1/2" MIN
Junction
box location
(right side only)
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
Cabinet 30"
A - Overlap of oven at top of cutout 1"
B - Overlap of oven other side of edge of cutout 3/4"
C - Overlap of oven at bottom of cutout 1-1/4"
Oven
D - Install depth 23-1/2"
E - Overall height with trim 28-5/8"
F - Overall width 29-3/4"
Cutout width
28-1/2" MIN.
28-5/8" MAX.
B
A
C
2 x 4 or
equivalent runners
level with bottom
of cutout and flush
with sides of cutout
Suitable
bracing
to support
runners
(must support 220 lbs.)
C
L
Cutout height
27-1/4" MIN.
27-5/16" MAX.
Recommended
cutout location
from the floor
32-1/2"
30''
F
E
Conduit
48"
Cutout depth
23-1/2" MIN
22" to
bottom of
junction box
Junction box
location
9-1/2" MAX.
D
23" min. door opening
allowance for drop-down doors,
and 30" min. allowance for
side-swing doors.
JTS3000DNBB, JTS3000DNWW, JTS3000ENES,
JTS3000SNSS, JTS5000BNTS, JTS5000DNBB,
JTS5000DNWW, JTS5000ENES, JTS5000FNDS,
JTS5000SNSS, PTS7000BNTS, PTS7000FNDS,
PTS7000SNSS, PTS700LSNSS, PTS700RSNSS
30"
JTS5000
Dimension and installation information are shown in inches.
or solid bottom floor.

Summary of content (3 pages)