Manual

Installation of the warming drawer.
Read these instructionscompletely and carefully.
InstallationBelow Wall Ovens
Installation below a single oven
23W'
2x2or2x4anti4ip --
blockagainstrear
wall9" fromfloor
to bottomof block
1" Min.abovetoekickor adjust
to oveninstallationheight
Installationbelowadoubleoven
10½
NOTE:Addificealclearancebetweencutoutsmay
be requiredCheckto be surethat ovensupports
abovethe warmingdrawerIocaticedo not obstruct
the requiredinterior23½"depthand9¼" height.
DimensionA DimensionB
27" Drawer 251/i" 26¥¢"
30" Drawer 281//' 30"
Abew5/8" ovedap
NOTE:Addificealclearancebetweencutoutsmay
be requiredCheckto be surethat ovensupports
abovethe warmingdrawerIocaticedo not obstruct
the requiredinterior23½"depthand9¼" height.
14
2x2or2x4anti4ip --
blockagainstrear _'23¼"_
wNI9" fromfloor _t_--_..
to bottomof block
10½
1"Min abovetcekick
%When installed, the front face of the wanning
drawer will be nearly flush with cabineny doors
or drawer fronts.
N Drawer overlaps will conceal cut edges on all
sides of the opening.
The roughopening for the drawer must be:
--Depth: 23_/Z' minimum fi'om inside back to
fi'ont of cabinet frame.
NOTE: Ifyou are installing in fFameless cabinets,
it may-be necessary to install 1/2" wide cleats to
accept drawer mounting screws. See drawer to
find exact locations of mounting screws,
Wheninstalledundera wall oven:
Wmaning drawei ,'sare suitable for installation
below only-certain specified wall oven models.
See the label attached Io the top of the wmrning
drawer for suitable models,
--Width: 25W'for 27"wide models
I l* tt *
28k for30 >ade models,
--Height: 9W"
--Allow 2 minimum be tween oven and drawe_
NOTE: Elecuical receptacle can be installed
as shown for counterlop installations. Do not
install receptacle above the top of the wmrning
drawer cutout,
cutouts for clearance of overlaps.