Manual
Installationof the warming drawer.
Read these instructionscompletely and carefully.
Before YouBegin
IMPORTANT'.Save these instructions for the
local electrical inspector's use.
IMPORTANT'.OBSERVEALL GOVERNINGCODES
AND ORDINANCES.
NOTE TOINSTALLER:Leave these instructions
with the appliance after installation is completed.
NOTE TO CONSUMER:Keep this Owner's
Manual and Installation Instructions for
future use.
NOTE:This appliance must be properly
grounded.
NOTE:Insure that the power cord does not
contact the hot surfaces on the bottom of
ovens, cooktops, or any other appliance.
Product Dimensions
27"_ _, 23ΒΌ"
indudinghandle
DimensionA
27" Drawer 30" Drawer
26_A" I 30"
CustomPanel Kits
ZXD27B--This kit provides for the installation of a
custom front panel on 27" wide models.
ZXD3OB--This kit provides for the installation of a
custom front panel on 30" wide models.
ToolsNeeded
++2 x4 or 2 x 2 lumber for rannei ,'sand brace
+_Wood screws and adhesive or olher hardware
for installing runnei_ or shelf to support
warmer drawer.
Runnersmustbe level rigidlymountedandcapableof
supporting150pounds.
NSaw
Level
++Drill and 1/ 16" bit
+_Phillips screwdriver
11