Use and Care Manual
49-2000254 Rev. 2 15
Probe
USING THE OVEN: Probe
WARNING
 Consuming undercooked food can result in foodborne illness. Use probe according to 
the following instructions to ensure all portions of the food reach minimum safe cooking temperatures. 
Recommendations for minimum safe food temperatures can be found at foodsafety.gov or IsItDoneYet.gov.
Internalfoodtemperatureisfrequentlyusedasan
indicator of doneness, especially for roasts and poultry. 
The Probe mode monitors the internal food temperature 
and turns the oven off when the internal food 
temperature reaches the programmed temperature.
Always check the temperature at multiple locations in 
the food with a food thermometer after cooking to ensure 
that all portions of the food have reached the minimum 
safe internal temperature for that food.
Proper Probe Placement
After preparing the meat and placing it on the cooking 
pan follow these instructions for proper probe placement.
■ Inserttheprobeintothefood,sothatthetipofthe
probe will rest in the center of the thickest part of 
the food. For best performance the probe should 
befullyinsertedintothefood.Iftheprobeisnot
located properly, it may not accurately measure the 
temperature of the coolest portion of the food. Some 
foods, particularly small items, are not well suited for 
cookingwiththeprobeduetotheirshapeorsize.
■ Theprobeshouldnottouchbone,fatorgristle.
■ Forwholepoultryinserttheprobeintothethickest
part of the breast. 
■ Forbonelessroasts,inserttheprobeintothecenter
of the roast. 
■ Forbone-inhamorlamb,inserttheprobeintothe
center of the lowest large muscle or joint. 
■ Forcasserolesordishessuchasmeatloaf,insertthe
probe into the center of the dish.
■ Forfish,inserttheprobefromjustabovethegillinto
the meatiest area, parallel to the backbone.
Probe Usage
ThetemperatureprobecanonlybeusedwithBake,
ConvectionBake,andConvectionRoast.
To use the probe with preheating:
1.  Select the desired cook mode (Bake, Convection 
Bake, or Convection Roast) pad and enter the 
desired cooking temperature with the number pads.
2. Inserttheprobeintothefood(seeProperProbe
Placement).
3.  Once the oven is preheated, place the food in the 
oven and connect the probe to the probe outlet, 
makingsureitisfullyinserted.Usecaution,theoven
walls and probe outlet are hot.
4.  When the probe is connected, the display will prompt 
you to enter the desired food temperature. The 
maximum internal food temperature that you can set 
is 200° F.
To use the probe without preheating:
1. Inserttheprobeintothefood(seeProperProbe
Placement).
2.  Place the food in the oven and connect the probe into 
the probe outlet in the oven.
3.  Press the Cook Mode pad (Traditional Bake, 
Convection Bake, or Convection Roast) and 
enter the desired cooking temperature with the 
number pads. Press Options and select Probe then 
follow the display prompts to enter the desired food 
temperature.
Probe Care Guidelines
■ Useofprobesotherthantheoneprovidedwiththis
product may result in damage to the probe outlet.
■ Usethehandlesoftheprobeandplugwheninserting
and removing them from the meat and outlet
■ Toavoiddamagingyourprobe,donotusetongsto
pull on the cable when removing it.
■ Toavoidbreakingtheprobe,makesurefoodis
completely defrosted before inserting the probe.
■ Topreventpossibleburns,donotunplugtheprobe
from the outlet until the oven has cooled.
■ Neverleavetheprobeinsidetheovenduringaselfor
steam clean cycle.
■ Donotstoretheprobeintheoven.










