Specification

JTD5000DN/BN/EN/FN/SN
GE
®
30" Built-In Double Electric Convection Wall Oven
For answers to your GE Profile
™
Series or GE Appliances product questions, visit our
website at geappliances.com or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/19
DIMENSIONS AND INSTALLATION INFORMATION
NOTE: 30” Double electric wall ovens are
approved for installation above 27” and 30”
warming drawers.
ATTENTION INSTALLER: Electric wall ovens
are NOT approved for installation with a plug
and receptacle. They must be hard wired into an
approved junction box.
IMPORTANT: Before installing, consult
installation instructions packed with ALL
products for current dimensional and combination
data.
WHEN TO USE THE PEDESTAL RAILS:
When replacing an older GE Appliances 30"
double wall oven with a new GE Appliances model.
Cutout Height = 51-13/16" to 51-15/16". This is our
traditional cutout height.
WHEN NOT TO USE THE PEDESTAL RAILS:
When replacing a 30" double wall oven from
another manufacturer (ie; Whirlpool) with a new
GE Appliances model. Cutout height = 50-1/4".
You will need to verify that the existing cutout
matches the 50-1/4" dimension.
If the new GE Appliances 30" double wall oven
is being installed into new construction (ie; not a
replacement), then the recommended installation
is to use the pedestal rails.
Flanges toward
center of cutout
Top cutout
toward front
Attachment
screws