manual
20 49-2000254 Rev. 0
CARE AND CLEANING:2YHQ'RRU
Oven Door Removal
NOTE:'RRUUHPRYDOLVQRWDUHTXLUHPHQWIRULQVWDOODWLRQ
of the product but is an added convenience.
To remove the door:
1.  Open the oven door as far as it will go.
2.  Remove hinge bracket (if present) from front frame 
and set aside. The hinge bracket must be replaced 
for proper door functionality when door is reinstalled.
3.  Push both hinge locks down toward the door frame to 
the unlocked position. This may require a flat-blade 
screwdriver. DO NOT LIFT THE DOOR BY THE 
HANDLE!
4.  Place hands on both sides of the door and close the 
oven door to the removal position (approximately 
´±´>FP±FP@IURPWKHFORVHGSRVLWLRQ
5.  Lift the door up and out until the hinge arms clear the 
slots. NOTE:7KHRYHQGRRULVYHU\KHDY\%HVXUH
you have a firm grip before lifting the oven door off 
WKHKLQJHV8VHFDXWLRQRQFHWKHGRRULVUHPRYHG
'RQRWOD\WKHGRRURQLWVKDQGOH7KLVFRXOGFDXVH
dents or scratches.
Replacing the Oven Door
NOTE: The oven door is heavy. You may need help 
lifting the door high enough to slide it into the hinge slots. 
'RQRWOLIWWKHGRRUE\WKHKDQGOH
1.  Lift the oven door by grasping each side.
2.  With the door at the same angle as the removal position 
DSSUR[LPDWHO\´±´>FP±FP@IURPWKHFORVHG
position), seat the notch of the hinge arm into the 
bottom edge of the hinge slot. The notch of the hinge 
arm must be fully seated into the bottom of the slot.
 )XOO\RSHQWKHGRRU,IWKHGRRUZLOOQRWIXOO\RSHQWKH
indentation is not seated correctly in the bottom edge 
of the slot.
4. Push the hinge locks up against the front frame of the 
oven cavity, to the locked position.
5.  Replace hinge bracket (if present). The hinge bracket 
must be replaced for proper door functionality.
6. Close the oven door.
Oven Door
Hinge in 
Locked 
Position
1RWFKRI+LQJH
Securely Fitted 
,QWR%RWWRPRI
Hinge Slot
%RWWRP
Edge of 
Slot
Hinge 
Arm
+LQJH1RWFK
+LQJH%UDFNHW
Hinge 
Slot
Hinge 
Arm
+LQJH8QORFNHG
Position
Hinge Clears Slot
+LQJH%UDFNHW










