manual
49-2000254 Rev. 0 19
CARE AND CLEANING: Oven / Probe / Oven Light
WARNING
  SHOCK OR BURN HAZARD:%HIRUHUHSODFLQJRYHQOLJKWEXOEGLVFRQQHFWWKHHOHFWULFDOSRZHUWRWKH
oven at the main fuse or circuit breaker panel. Failure to do so may result in electric shock or burn.
CAUTION
 BURN HAZARD: The glass cover and bulb should be removed when cool. Touching hot glass with 
bare hands or a damp cloth can cause burns.
 'LVFRQQHFWSRZHUDWWKHPDLQIXVHRUFLUFXLWEUHDNHU
panel.
2.  Remove oven racks.
3.  Slide a flat blade screwdriver or butter knife between 
the metal housing and the glass light cover. 
NOTE: on some models there is a metal clip visibly 
holding the glass. The tool needs inserted between 
the metal housing and the clip holding the glass.
4.  Support the glass light cover with two fingers to prevent 
the cover from falling to the bottom of the oven. 
5.  Gently twist the screwdriver blade or butter knife to 
ORRVHQWKHJODVVOLJKWFRYHU%HFDUHIXOQRWWRFKLS
the oven coating.
6.  Remove the glass light cover.
7.  Remove the bulb by firmly grasping and sliding the 
bulb straight out until the two prongs have cleared 
the ceramic holder.
 'RQRWWRXFKWKHJODVVRIWKHQHZUHSODFHPHQWEXOE
ZLWK\RXUILQJHUV,WZLOOFDXVHWKHEXOEWRIDLOZKHQLW
lights. Grasp the replacement bulb with a clean towel 
or facial tissue with the prongs facing down. Align 
the two prongs in the ceramic holder, pressing gently 
until the bulb is securely in the ceramic socket.
9.  Slide the protective lens into the holder and push 
until the clips snap into the housing.
10. Reconnect power.
Oven Light
Probe
The temperature probe may be cleaned with soap and 
water or a soap-filled scouring pad. Cool the temperature 
probe before cleaning. Scour stubborn spots with a 
soap-filled scouring pad, rinse and dry.
To order additional temperature probes read the 
Assistance and Accessories sections at the beginning of 
this manual.
Ŷ 'RQRWLPPHUVHWKHWHPSHUDWXUHSUREHLQZDWHU
Ŷ 'RQRWVWRUHWKHWHPSHUDWXUHSUREHLQWKHRYHQ
Ŷ 'RQRWOHDYHWKHWHPSHUDWXUHSUREHLQVLGHWKHRYHQ
during a self or steam clean cycle.
Oven (Cont.)
Oven Racks
Racks that are enameled, not shiny, can be left in the 
cavity during self clean, or can be washed with warm, 
soapy water.
Racks may be more difficult to slide, especially after a 
self-clean. Put some vegetable oil on a soft cloth or paper 
towel and rub onto the left and right edges.










