Installation Guide
2 A
CUTOUT FOR SINGLE OVENS IN WALL CABINET
NOTE: If the cabinet does not have a front frame and the sides are less than ¾” (1.9 cm) thick,
shim both sides equally to establish the cutout width.
These ovens
are not
approved for
installations that
stack one single
wall oven above
another single
wall oven.
Cutout –
observe all
dimensions and
requirements.
Cutout –
observe all
dimensions and
requirements.
2” (5.1 cm) Min.
30.5” (77.5 cm)
30” models
27” (68.58 cm)
27” models
Center Line Center Line
Side-by-Side Installations
Install two ovens in separate cutouts.
2 B
CUTOUT FOR SINGLE OVENS – UNDER COUNTER
NOTE: These ovens are only approved to be installed under the specific models as labeled on
the unit.
NOTE: One cooktop may be centered over either
oven in the side-by-side installation.
Cutout – observe
all dimensions and
requirements.
2” (5.1 cm) Min.
30.5” (77.5 cm) 30” models
27” (68.58 cm) 27” models
Center Line Center Line
Side-by-Side Installations
Install two ovens in separate cutouts.
Cooktop
Cutout – observe
all dimensions and
requirements.
H
B
F
G
C
D
A
E
Junction
Box
Location
(junction
box may
be located
in adjacent
cabinet)
22” (55.9
cm) Min.
to Bottom
of Junction
Box
Cutout Depth
23-1/2”
(59.7 cm) Min.
Recommended
Cutout Location
from Floor
32-1/2” (82.6 cm)
Opening
Between Inside
Walls Must be
at Least 28-1/2”
(72.4 cm) Wide
NOTE: Allow
1/4” (0.64 cm)
clearances from
side edges of
oven door.
Continue to Section 4.
Dimension Dimension Description 27” Single Oven 30” Single Oven
A Cabinet Width 25” (63.5 cm) min.
25
1
»4” (64.1 cm) max.
28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
B Cutout Height 27
5
»8” (70.2 cm) min.
28
1
»8” (71.4 cm) max.
27
1
»4” (69.2 cm) min.
27
5
»16” (69.4 cm) max.
C Clearance from cutout - top* 1” (2.5 cm) 1” (2.5 cm)
(1
1
»4” (3.2 cm) for
PT9050
ZET1S and ZET1P)
D Clearance from cutout - bottom* 1” (2.5 cm) 1
1
»4” (3.2 cm)
E Clearance from cutout - side edges* 1” (2.5 cm)
11
»16” (1.75 cm)
F Junction Box Location 8
3
»4” (22.2 cm) max.
right side only
9
1
»2” (24.1 cm) max.
right side only
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
Dimension Dimension Description 27” Single Oven 30” Single Oven
A Cabinet Width 27” (68.6 cm) 30” (76.2 cm)
B Cutout Width 25” (63.5 cm) min.
25
1
»4” (64.1 cm) max.
28
1
»2” (72.4 cm) min.
28
5
»8” (72.7 cm) max.
C Cutout Height 27
5
»8” (70.2 cm) min.
28
1
»8” (71.4 cm) max.
27
1
»4” (69.2 cm) min.
27
5
»16” (69.4 cm) max.
D Clearance from cutout -
side edges*
1” (2.5 cm)
11
»16” (1.75 cm)
E Clearance to Adjacent
Corners, Drawers, Walls,
etc., When Door Is Open
23” (50.8 cm) min. 23” (53.3 cm) min.
F Clearance from cutout -
top*
1” (2.5 cm) min. 1” (2.5 cm) min.
(1
1
»4” (3.2 cm) for PT9050,
ZET1S and ZET1P)
G Clearance from cutout -
bottom*
1” (2.5 cm) min. 1
1
»4” (3.2 cm)
H Junction Box Location 8
3
»4” (22.2 cm) max.
right side only
9
1
»2” (24.1 cm) max.
right side only
* Refers to minimum clearance required for wall oven installation and does not reflect actual product dimensions.
IMPORTANT: Maintain
a minimum distance
of 31-1/4” from the
top surface of the
countertop to the
wall oven platform to
ensure that the cooktop
and wall oven do not
interfere with each other
(see picture).
31-1/4” min.
(79.4 cm)
SIDE VIEW
Cooktop
Wall Oven
2-1/2” min. (6.4cm)