Specification

OPTIONAL UNDERCOUNTER DIMENSIONS AND INSTALLATION INFORMATION
For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
JT1000DF
GE
®
30" Built-In Single Wall Oven
Specification Revised 9/18
ADA
COMPLIANT
Listed by
Underwriters
Laboratories
NOTE: 36" ribbon cooktop are approved
for use over GE 30" single wall ovens and
warming drawers. 30" ribbon cooktops
are approved for use over 30" and GE 27"
single wall ovens and warming drawers.
Refer to cooktop and wall oven installation
information packed with products for current
dimensional data.
NOTE: Door handle protrudes 3" from door
face. Cabinets and drawers on adjacent 45°
and 90° walls should be placed to avoid
interference with the handle.
INSTALLATION INFORMATION: Before
installing, consult installation instructions
packed with products for current dimensional
data and for alternate installation options.
WITH GAS COOKTOP
WITH ELECTRIC COOKTOP
Note: For this installation, the bottom trim will not be
flush with a typical 4" toe kick.
Note: Cabinets installed adjacent to wall ovens must have
an adhesion spec of at least a 194°F temperature rating.
ELECTRIC WALL OVENS ARE NOT
APPROVED FOR INSTALLATION WITH
A PLUG AND RECEPTACLE. THEY
MUST BE HARD WIRED IN ACCORDANCE
WITH INSTALLATION INSTRUCTIONS.
Dimension and installation information are shown in inches.
30" Oven W/ Rad. Cktp.
4"
to
4-1/2"
36" Typical
Countertop height
Power cord
31-1/4"
MIN.
1-1/2" MIN.
Free space
1-1/2" Typical countertop
Side View
22"
27-5/16" MAX.
Cutout height
27-1/4" MIN.
Junction box(s) for
oven & radiant
cooktop 22"
from floor
of cutout
Add suitable filler to match
adjacent cabinets when needed
to maintain toe kick alignment
3/4" Support