Manual

ManualsBrandsGE ManualsRange hoodOfficial GE range hood

Installation Instructions

DAMAGE - SHIPMENT/INSTALLATION

• If the mfit is dmnaged in shipment, return the unit to the

store in which it was bought for repair or replacement.

• If the refit is dmnaged by the customer, repair or

replacement is the responsibility of the customer;

• If the refit is dmnaged by the installer (if other than

the customer), repair or replacement must be made

by arrangement between customer and instnlle_:

MOUNTING SPACE

Bottomedgeof

cabinetneeds

to be30" or

_] morefrom

the cooking

surface

66" or more

from the floor ___

to the top of __

the hood

NOTES:

• This range hood is for installation oxer ranoes or

cooktops up to. o Wl(le.

• If xou are going to vent )our range hood to the

outside, see the "Ducting Requirements" section

for exhaust duct preparation.

TOOLS YOU WILL NEED

Flatbladeand Phillips

screwdrivers

Pencil

Duct tape

Saw (saber or keyhole) Electric drill Metal snips

(in some

applications)

1/4" pivoting Pliers Tapemeasure

hex socket

Wire stripper

Flashlight Caulking Level 1/4" Nutdriver

PARTS INCLUDED

PART

GreaseFilteronly(JV338)

CharcoalFilteronly

(JN327andRN328)

GreaseFilterandCharcoal

Filter(JV347,JV348andJV367)

MountingScrews

(8- 18x 3/4" Phillipspanhead)

ExhaustAdaptor

(for3X" x 10"rect.venting)

ExhaustAdaptorScrew

(8- 18x 3/8 Phillipspanhead

orhexhead)

QUANTITY