Manual

Read these instructions completely and carefully.
Step 2--Install WarmingDrawer
[] Slide the left corner into opening and push
power cord into the hole leading to the
outlet location. Thread the cord through
as drawer is being pushed back into the
opening.
If the outlet is installed inside the
opening, plug the cord into the outlet.
In this location, the excess power cord
should be coiled and taped to the _ight
side of the unit. Make sure the cord does
not get trapped by the drawer:
NOTE'. Insure that the power cord does not
contact the hot stu_i_ces on the bottom of
ovens, cooktops, or any other appliance.
[] Push the draxver back until the front flange
is flush to the cabinet fl'ont.
[] D_-ill pilot holes through the holes in the
oxerlaDDing J[l'[lille, one on each coYneI;
[] D_ixe wood screws proxided into each
coYnei;
[] Open the drawer flfllv.
/5