Manual

[] Electrical Connections
[] Usage Situationswhere Appliance
Power Cord will be Disconnected
Frequently.
Do not use an adapter plug in these situations
because disconnecting of the power cord
places undue strain on the adapter and leads to
eventual thilm'e oI the adapter grotmd temfinal.
The customer should have the two-prong wall
receptacle replaced with a tl_ree-prong (grotmding)
receptacle by a qualified electrician ])eft)re using
tl_e appliance.
The installation of appliances designed fin.
mobile home installation must confimn with tl_e
Manufhctm'ed Home Construction and Safety
St;mdard, Title 24 (:HI, Part 3280 (fimnedy the
Federal Standard t0r Mobile Home Construction
and Satety, Title 24, HUD, Part 280) m; when such
standard is not applicable, the Standard tot
Malmfi_ctured Home h_stallafions, latest edition
(Malmfi_ctured Holne Sites, Colmmmities aim
Set-Ups), ANSI A225.1, latest edition, or with local
codes. In (:anada, mobile holne installation nmst
be in accordance with the current CAN/CSA
Z240/MH Mobile Home Installation Code.
Electric Disconnect
:_ i,ocate (liscmmect plug on tl_e range 1)ack.
:_ Pinch sides ot com_ector and pull out of range
back.
[] Seal the Openings
Seal an_ openings in the wall behind tl_e range and
in the floor under the range when hookups are
completed.
[] Check Ignition of Surface Burners
Operation ot all cooktop and oxen bm'ne_ should
be checked atter the range and gas supply lines
haxe been careflfllx checked tot leaks.
Electric IgnitionModels
Select a top bm'ner knob and sire ultaneouslv
push in and mrn to LITEposition. You will hear
a clickingsotmd indicating proper operation of the
spark module. Once tl_e air has been pm'ged from
the supply lines, bm'ne_ should light within
4 seconds. _Mter bm'ner lights, rotate knob out of
the LITE position. T_' each burner in succession
tmtil all burne_ have been checked.
49