Manual

Aboutchangingthepower level gecom
Power Level
Select tile power level befi)re entering the
cooking time. Press POWERLEVEt 5mtil the
desired power level appem_ in the display.
The maximum programmable cooldng
time at Power Le\el 10 is 30 minutes. For
Press Power Level
Once PIO(High)
Twice ,°9
3 times ,°8
4 times P7(MecL-High)
5 times P6{Medium)
6 times P5
7 times P4
8 times P3{MecL-Low)Defrost
9 times P2
10tl?nes PI (Low)
other Pox_er I,ex els, the ma_mum cooldng
time is 99 mimstes and 99 seconds.
Variable power levels add fle_bilitv to
microwa_v cooldng. Power Level 7 (PT) is
mic_owa\v energy at 70% of flfll powes:
Power I,eve] 3 (P3) is microwave energy at
30% of flfll powel: Most cooldng will be
done on High (PIO), which gives you 100%
ot pewee
A high setting (PIO) will cook thster but
ff_od may need more fi'equent stirring,
rotating or turning oven A lower setting will
cook more evenly and need less stirring or
rotating of the fl)od.
Herearesomeexamplesofusesforvarious
powerlevels:
PIO High for fish, bacon,vegetables,boiling
liquids, etc.
P7 Medium high for gentle cooking of meat
and poultry,baking casserolesand
reheating
P5 Medium for slow cookingand tenderizing
for stews and lesstender cuts of meat
P2or Low for defrosting
P3
Aboutthe time features.
To Cook by Time
The microwave is automatically set for
Power i,evel 10 (High). It can be changed
for cooking flexibili_:. At Power I,evel 10,
the ma_mum programmable cooking time
is 30 minutes. Maximum cooking times
for Power I,evels 1 to 9 are 99 minums
and 99 seconds.
_ Press POWERLEVELtmtil the desired
power level appea_s in the displa)
window. Skip this step if you wish to
use Power i,evel 10.
_'_ Enter the cooking time usino the
I1 Hlllber pads.
_ Press START
You may open the door during the cooking
time to check the fi)od. Close the door and
press START to resume cooking. The
microwave will beep 5 times to signal that
the cooking time is completed.
Stage Cooking
YOII (Oil l)r°gI'aIll, 511) to ,_ ('ookiIlg, sin ges:,
_ Press POWERLEVEL tmtil the desired
power level appears in the displa)
window.
_'_ Set the cooking time using the
nmnber pads.
_ Repeat steps 1 and 2. (For additional
stages,, rei)eat steps 1 and 2).
D Press START
Each cooking stage time will count down
in the display. The microwave will beep 2
times between each stage. At the end of the
sequence, the microwave will beep 5 times.