Manual

Before ou call for service... GEAppliances.com
Possible Causes What To Do
"LOCKED"(orLOC) The control has been Press and hold CANCEL/
appears in display locked. OFF or about three
seconds to unlock the
control.
Food amount too large
for Sensor Reheat
&ensor Reheat is for single Use Time Cook for large
servings of recommended amounts of food.
foods.
"FOOD(or food)"
appears on display
For safe cooking "food
detection algorithm" is
added to prevent micro-
wave cooking without
first placing food into the
cavity. Through monitor
the door open/close
switch, Food Detection
Algorithm control the
initiating a cooking
sequence.
You should open the door
to check the food. (For
users who place food into
the cavity before selecting
a cooking sequence, the
door switch is read to
determine the door has
been opened and then
closed. Upon opening and
the door, a 5-minute
count down timer is started
You can then make your
cooking selection prior to the
expiration of the timer.
When 5-timer expires, if you
elect a cooking sequence,
"FOOD" will oppeur on the
display and an error beep
will sound. Then you should
open the door to check the
food before selecting a
cooking sequence.)
31