Installation Guide

7
Installation Instructions
6
ANTI-TIP DEVICE INSTALLATION
Select the proper position for the countertop
thickness and move bracket to proper position. (Unit
is sup plied with brack et in po si tion 1.)
1 For 1.18” (3 cm) Counter
2 For 1.5” Counter
3 For 3.5” Counter
4 Alternate
(shown below)
Anti-tip bracket location
(rear of range)
Cooktop
ANTI-TIP INSTALLATION
Interior wall
1/4” min. flat area
Wall stud
Countertop
thickness
Bottom of
countertop
Wire cover
Maintop
Anti-tip
bracket
Bottom of
countertop
to engage
bracket by
1/2” min.
Wall stud
10-3/8”
1-1/2”
Countertop
surface
Interior wall
Wire
cover
Attachment
anchored to wall
stud is required
Anti-tip bracket
Attachment
Non-kit ap pli ca tion
Maintop
Position
#5 non-kit
application
*Attachment
to engage
bracket by 1/2” min.
WARNING
• To reduce the risk of tipping the range, the range must be properly secured to the countertop or rear wall
using the anti-tip suppport. (See section 3 for details.)
• Weight on the door could potentially cause the range to tip and result in injury. Never allow anyone to
climb, sit, stand, or hang on the oven door.
Installing the Anti-Tip Bracket
The anti-tip bracket is attached to the back of the
Drop-In Range. It is designed to fit under the bottom
of the countertop opening at the rear. Measure
counter thickness at back of cutout to determine
correct bracket location.