User Manual

49-2000999 Rev. 1 21
CARE AND CLEANING: Cleaning the Glass Cooktop
To maintain and protect the surface of your glass cooktop,
follow these steps:
1. Before using the cooktop for the first time, clean it
with a ceramic cooktop cleaner. This helps protect the
top and makes cleanup easier.
2. Regular use of ceramic cooktop cleaner will help keep
the cooktop looking new.
3. Shake the cleaning cream well. Apply a few drops of
ceramic cooktop cleaner directly to the cooktop.
4. Useapapertowelornon-scratchcleaningpadfor
ceramic cooktops to clean the entire cooktop surface.
5. Useadryclothorpapertoweltoremoveallcleaning
residue. No need to rinse..
NOTE:ItisveryimportantthatyouDONOTheatthe
cooktop until it has been cleaned thoroughly.
Burned-On Residue
NOTE:DAMAGEtoyourglasssurfacemayoccurifyou
use scrub pads other than those recommended.
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop cleaner on
the entire burned residue area.
3. Usinganon-scratchcleaningpadforceramic
cooktops, rub the residue area, applying pressure as
needed.
4. If any residue remains, repeat the steps listed above
as needed.
5. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
Heavy, Burned-On Residue
1. Allow the cooktop to cool.
2. Useasingle-edgerazorbladescraperatapproximately
a 45° angle against the glass surface and scrape the
soil. It will be necessary to apply pressure to the razor
scraper in order to remove the residue.
3. After scraping with the razor scraper, spread a few drops
of ceramic cooktop cleaner on the entire burned residue
area.Useanon-scratchcleaningpadtoremoveany
remaining residue.
4. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
Metal Marks and Scratches
1. Be careful not to slide pots and pans across your
cooktop. It will leave metal markings on the cooktop
surface.
These marks are removable using the ceramic
cooktop cleaner with a non-scratch cleaning pad for
ceramic cooktops.
2. If pots with a thin overlay of aluminum or copper
are allowed to boil dry, the overlay may leave black
discoloration on the cooktop.
This should be removed immediately before heating
again or the discoloration may be permanent.
NOTE: Carefully check the bottom of pans for roughness
that would scratch the cooktop.
3. Be careful not to place aluminum baking sheets or
aluminum frozen entrée containers on a hot cooktop
surface. It will leave shinny dots or markings on the
cooktop surface. These markings are permanent and
cannot be cleaned off.
Cleaning the Glass Cooktop
Clean your cooktop
aftereachspill.Use
a ceramic cooktop
cleaner.
Ceramic
Cooktop
Cleaner
Useanon-scratchcleaningpadfor
Ceramic Cooktops.
The ceramic cooktop scraper and all recommended supplies
are available through our Parts Center. See the Accessories
and Consumer Support sections at the end of this manual.
NOTE:Donotuseadullornickedblade.
For cleaning videos and
instructions, scan the QR
code with your device.