MSDS

MATERIAL SAFETY DATA
SHEET
Version: 1.8
12/20/2012
GE5070
SILICONE SEALANT
Page 3/8
INHALATION
If inhaled, remove to fresh air. If not breathing give artificial respiration using a barrier device. If
breathing is difficult give oxygen. Get medical attention.
EYES
In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
NOTE TO PHYSICIAN
None known.
5. FIRE-FIGHTING MEASURES
FLASH POINT:
> 93.3 °C; 200 °F
METHOD
Estimated
IGNITION TEMPERATURE:
No data available.
FLAMMABLE LIMITS LEL:
No data available.
FLAMMABLE LIMITS UEL:
No data available.
SENSITIVITY TO MECHANICAL IMPACT:
No
SENSITIVITY TO STATIC DISCHARGE
Sensitivity to static discharge is not expected.
EXTINGUISHING MEDIA
All standard extinguishing agents are suitable.
SPECIAL FIRE FIGHTING PROCEDURES
Firefighters must wear NIOSH/MSHA approved positive pressure self-contained breathing
apparatus with full face mask and full protective clothing.
6. ACCIDENTAL RELEASE MEASURES
ACTION TO BE TAKEN IF MATERIAL IS RELEASED OR SPILLED
Wipe, scrape or soak up in an inert material and put in a container for disposal. Wash walking surfaces
with detergent and water to reduce slipping hazard. Wear proper protective equipment as specified in
the protective equipment section.