H855
ii
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. For customers in the U.S.A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
SAFETY PRECAUTIONS iv Camera notes: Do not store or use the camera in the following types of locations: • In the rain, very humid and dusty places. • In a place where the camera can be exposed directly to the sunlight or subject to high temperature, e.g. Inside a closed car in summer. • In a place where the camera is subject to a high magnetic field, e.g. near motors, transformers or magnets.
BEFORE YOU START Preface Safety information Thank you for purchasing GE digital cameras. Please read this manual carefully and keep it in a safe place for future reference. Please read the following important information carefully before using the product. • Do not take apart or attempt to service the camera yourself. • Do not drop or knock the camera. Improper handling may damage the product. • Turn off the camera before inserting or removing the battery and memory card.
• Do not expose the camera to moisture, or extreme temperatures. Extreme environments may shorten the life of your camera or damage the batteries. • Do not use or store the camera in dusty, dirty, or sandy areas, as its components may be damaged. • Do not expose the lens to direct sunlight for extended periods. • Download all pictures and remove the batteries from the camera if you are going to store the camera for long periods.
CONTENTS WARNING SAFETY PRECAUTIONS BEFORE YOU START................................. 1 Preface............................................................. 1 Copyright................................................... 1 Trademarks............................................... 1 Safety information......................................... 1 About this manual......................................... 2 Symbols used in this manual................ 2 CONTENTS.................................................
LCD Screen display......................................28 Still shooting mode display.................28 Video shooting mode display..............30 Playback mode display.........................31 Scene mode...................................................32 Sport.........................................................32 Children...................................................32 Indoor.......................................................32 Leaf...................................................
Digital Zoom...........................................49 Histogram...............................................50 Slow shutter............................................50 Movie menu...................................................51 Cont. AF (Continuous AF)......................51 Expo Metering (Exposure Metering)..52 Stabilization............................................52 Playback menu.............................................53 Protect.....................................................
Connecting to a PictBridge compatible printer............................................................71 Setting the USB mode...........................71 Using the PictBridge menu........................73 Print with date.......................................73 Print without date.................................74 Print index...............................................75 Print DPOF...............................................76 Exit............................................................
GETTING READY Unpacking Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact your vendor. (The accessories will vary based on model purchased and are noted below.
Camera views : H855 Front View 1 2 Back View 5 3 6 7 8 9 H855 4 10 Right View Navigation Pad 14 15 11 12 13
Top View Bottom View 16 Left View 22 17 19 20 18 1 Flash 13 Self-timer/ Down button 2 Mic 14 Func/ok button 3 Lens 15 Flash mode/ Left button 4 AF assist beam/Timer indicator 16 Power button 5 LCD screen 17 Shutter button 6 Status LED 18 Zoom scroll wheel 7 Face detection AF button 19 Tripod mount point 8 Mode dial 20 USB/ AV port 9 Menu button 21 Memory card / Battery compartment 10 Erase button 22 DC IN port 11 Exposure compensation/Up button 23 Wrist strap
Charging the battery and Inserting the battery 1. Place the battery into the charger as shown. 2. Plug one end of the connecting cable into the charger base. 3. Plug the other end of the connecting cable into a wall outlet. 1 2 Leave the battery to charge until the charger light goes green. (To maximize battery life, the first charge should be at least 4 hours) 10 1. Open the battery compartment.
2. Insert the battery while observing the correct polarity. Use the side of battery to press down the stopper as shown, allowing the battery to be inserted properly. 3. Close the battery compartment. Battery capacity decreases with usage.
Inserting an optional SD/SDHC card 1. Open the battery compartment. Optional SD/SDHC cards are not included. The use of 64MB to 4GB memory card is recommended for reliable data storage. 12 2. Insert an optional SD/SDHC card into the memory card slot as shown.
3. Close the battery compartment. Turning on and off Press the Power button to turn the camera on. To turn off the camera, press the Power button again. Power button To remove the SD/SDHC card, open the battery compartment and gently push the card to release it. Pull the card carefully. When turned on, the camera will enter the mode according to the mode dial setting. You can also turn the mode dial to change the modes after the camera is turned on.
Using the Mode Dial The GE camera provides a convenient mode dial that allows you to switch between different modes with ease. All the available modes are listed as follows. Mode Name Auto Playback Movie Image Stabilization Scene Portrait Panorama Manual 14 Icon Description Switch to take still pictures. (The camera uses the default programmed automatic settings.) Switch to view the pictures/videos stored in the memory card and internal memory. Switch to record videos.
Setting display language, date, and time To set the language, date, and time, the following settings need to be configured in the Setup menu. • Date / Time • Display language To access the Setup menu, do the following: 1 .Press Power to turn the camera on. 2. Press the button and use Up/Down/Left/ Right to select the Setup menu ( ). When using the camera for the first time, the language menu will appear automatically. Setting the Date and Time 1. Use the Up/Down to select Date/Time.
2. Press the Left/Right to highlight each field and use the Up/Down to adjust the value. 3. Press the button to confirm the setting. Setting the Language 1. Use the Up/Down to select Language. Then press the Right to enter the setting. 2. Use the navigation buttons to select the desired language. 3. Press the button to confirm the setting.
About the LCD screen When you turn the camera on, various icons are shown on the LCD screen to indicate the current camera settings and status. To learn more about the displayed icons, see “LCD Screen display” on page 38. LCD Screen notes: Extremely high-precision technology had been used to manufacture the LCD screen so that most of the pixels are operational for use. However, there may be some minute points (black, white, red, blue or green) that constantly appear on the LCD screen.
BASIC OPERATION Shooting in Auto mode Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results. To start shooting, do the following: 1. Set the mode dial to Auto mode ( ). 2. Press Power to turn the camera on. 3. Compose your picture on the LCD screen and press the shutter button halfway to focus on the subject. 4. When the subject is in focus, the green colored focus frame appears on the center of the LCD screen. 5.
Using the flash Using the self-timer There are six flash modes. Press the Left/ Flash to cycle through the following flash modes. To enable the self-timer function, press the Down/Self-timer to select 2-second timer delay, 10-second timer delay, or a continuous shot. • Auto flash Flash fires automatically when required. • Red-eye reduction flash The camera fires a brief flash before the picture is taken to reduce red-eye effects. • Forced flash Flash always fires. Flash off Flash is turned off.
Using Macro mode Exposure compensation In Macro mode, you can capture tiny details of the subject at a very close range. Press the Right/Macro to take close-up shots. The exposure compensation allows you to adjust the background brightness to produce the best result of photos. To change the exposure values, do the following: 1. Press the Up/Exposure to display the exposure setting. • Macro Select this to focus on subjects 5cm from the lens. 2.
Advanced function menu WB (White Balance) The white balance allows the user to adjust the color temperature under different light source to ensure faithful color reproduction. (The WB setting is only available when the camera is in the Manual mode). To set the white balance, do the following: 1. Press the button to enter the Function menu. Make sure the WB function is selected. 2. Use Up/Down navigation buttons to select an option.
ISO The ISO function allows you to set the camera sensor sensitivity to light. To improve the performance in darker environments, a higher ISO value is required. On the other hand, a lower ISO value is needed in bright conditions. (The ISO setting is only available when the camera is in the Manual mode). To set the ISO value, do the following: 1. Press the button to enter the Function menu. 2. Use the Left/Right navigation buttons to highlight the ISO function.
Quality The quality setting adjusts the compression ratio of the images. Higher quality settings give better photos, but will take up more memory space. 3. Use the Up/Down navigation buttons to select a desired setting. Three options are available. • : Best quality (Standard compression) • : Fine quality (High compression) • : Normal quality (Maximum compression) To set the image quality, do the following: button to confirm your setting. 1. Press the button to enter the Function 4. Press the menu. 2.
Size The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image. To set the image size, do the following: 1. Press the button to enter the Function menu. 2. Use the Left/Right navigation buttons to highlight the Size function. 3. Use the Up/Down navigation buttons to select a resolution. 4. Press the button to confirm your setting. 5. The number of available shots is displayed on the screen.
Color The color setting allows you to add artistic effects directly when taking shots. You can try different color tones to alter the mood of your pictures. (The Color setting is only available when the camera is in the Manual mode). To set the image color, do the following: 1. Press the button to enter the Function menu. 2. Use the Left/Right navigation buttons to highlight the Color function. 3. Use Up/Down to select an option.
• Size settings in shooting mode. (•: available) Icon File size (Pixels) 0.
Icon File size (Pixels) Model name : H855 7M: 3088×2320 7M(3:2): 3312×2208 7M(16:9): 3696×2079 8M: 3312×2488 9M(3:2): 3696×2464 9M(16:9): 4032×2268 10M: 3696×2776 10M(3:2): 4032×2688 12M: 4032×3024 • • 27
USING THE MODES LCD Screen display Still shooting mode display Mode: 1 2 3 4 5 6 7 2 Scene icon (only available for Scene mode) 8 9 10 18 19 11 12 13 14 15 16 17 1 Shooting mode icon Auto Panorama Scene 28 Manual Portrait Image Stabilization Sport Fireworks Children Indoor Glass Leaf Landscape Snow Night landscape Sunset Night portrait 3 Light metering method Spot AE Center-Weight Ai AE 4 EV indicator 5 Self-timer indicator 2-second self-timer 10-second self-timer Continuous
6 Macro mode indicator Macro mode 7 Flash mode indicator Auto flash Red-eye reduction flash Forced flash Flash off Slow Synchro 13 White balance (only available for Manual mode) 14 ISO (only available for Manual mode) 15 Image quality 16 Image size 17 Image color (only available for Manual mode) 18 EV adjustment bar 19 Memory card/internal memory indicator Red-Eye Reduction+Slow Synchro 8 Battery status 9 Mode name Appears for 3 seconds when the mode is first switched to.
Video shooting mode display Mode: 1 2 3 4 5 3 EV indicator 4 Self-timer indicator 2-second self-timer 6 8 7 14 13 10 9 11 12 1 Shooting mode icon 2 Light metering method Spot AE Center-Weight Ai AE 30 10-second self-timer Continuous shot 5 Macro mode indicator Macro mode 6 Battery status 7 Mode name Appears for 3 seconds when the mode is first switched to. 8 Remaining time for videos that can be taken.
14 Memory card/internal memory indicator For best movie results, the use of SD cards is recommended. Movie recordings using internal memory are subject to quality degradations. While movie recording is in progress, optical zoom will stay fixed, but up to 1.5X digital zoom will remain available.
Scene mode In Scene mode, you can select from a total of 12 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you. To enter the scene mode, turn the mode dial to Scene mode. The scene mode palette appears. Use Up/Down/Left/Right to select a scene, and press the button. Sport For shooting fast-moving objects. Bring lively pictures to life. Children For shooting kids and pets.
Snow For shooting snow scenes. Balances the white scenery. Landscape For shooting landscapes. Vivid reproduction of green and blue. Sunset For shooting sunsets. Vivid reproduction of red and yellow. Night landscape For shooting night scenes. Use of tripod is recommended. Fireworks For shooting at night and fireworks. Shutterspeed is slower than normal. Night portrait For shooting portraits with night scenes as background. Glass For shooting objects behind transparent glass.
Return to the scene mode palette Panorama mode Panorama mode allows you to shoot ultra wide panoramic shots. It allows you to create beautiful wide-view photos by stitching three images into a single panoramic picture. 1. In Scene mode, press the button to enter the Function menu. 2. Press the button to return to the scene mode palette. You can also set the Image Quality and Image Size from the Function menu. For more setting details on the options, refer to “Advanced function menu” on page 21.
2. Use the Left/Right navigation buttons to select which side to record from; left to right or right to left. Then press the button. 3. Compose your first view on the LCD screen and press the shutter button. 4. The frame record icon will display under the focus frame to indicate the number of photos you have taken. 5. Capture the second and third views as taking the first view, making sure that the edges of pictures overlap. 6. The camera will then stitch the pictures into a panorama automatically. 7.
Image Stabilization mode The Image Stabilization mode combats the effect of hand shake and allows you to take pictures that would otherwise be blurred. 1.Switch the mode dial to ( ) mode. 2.Press Shutter halfway to focus on the subject. 3.Press Shutter fully to capture the image. 36 Setting the Image Stabilization function under ( ) mode. (Stabilization during Movie mode is only available when the Frame Rate is set to 15 fps) 1.Switch the mode dial to ( ) mode. 2.
The stabilizer function is used for less blur picture caused by hand shake under a dark environment, the camera would increase the ISO level under the mode to have a higher shutter speed. This function may not help to take a clear picture about a fast moving target, a car passing by with a speed etc. This function may not help if you stay on a fast shaking car, boat etc. It is only for a normal shoot on a ground by hand. Increasing the ISO level may cause heavier noise on the photo.
Face Detection 38 The Face Detection mode will detect the faces of persons in a photo so that the faces will be as clear as possible. 1.In Shooting mode, press to enable Face Detection. 2.Hold the camera securely, and point the camera towards the subject to start the face detection process. When the camera detects a face, a white rectangular frame will be drawn around the face. If no faces can be detected, a circular frame will appear on the LCD screen.
PLAYBACK Viewing photos and videos To view the captured photos and video clips on the LCD screen: 1. Turn your camera to Playback mode. The last recorded photo or video clip is displayed. 2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card. 3. To play a selected video clip, press the button to enter the movie playback mode. 4.
During the video playback, an operation guide appears on the screen. You can use the navigation pad to perform the functions accordingly. During the video playback, you can use the Up/Down navigation buttons to adjust the volume of playback. 40 During the slow motion playback, you can use the Left/Right navigation buttons to adjust the speed of playback. Volume will be muted when using the slow motion playback.
Editing video Press the Edit program button to enter the following screen and use the buttons on the left side to edit the playback. Use the Up/ Down navigation buttons to select a button. 1. Select the button and use the Left/ Right navigation buttons to specify the new beginning of the playback. 2. Select the button and use the Left/ Right navigation buttons to specify the new end of the playback. 3. To save the file, select the button and press the button. 4.
5. Press the setting. Thumbnail view button to confirm your To exit the Edit screen, select the ton and press the button. but- Edited video must be at least 1 second long to be saved. With sufficient battery and at least 1GB of available memory, up to 30 minutes of footage can be recorded per movie. 42 When in Playback mode, move the zoom scroll wheel to the Wide position ( ) once to display the thumbnail of photos and video clips on the screen. 1.
Using zoom playback (for still pictures only) The zoom scroll wheel can also be used during playback. This allows you to magnify photos up to 8X. 1. Turn your camera to Playback mode. 2. Use the Left/Right navigation buttons to select a photo to magnify. 3. Move the zoom scroll wheel to the Tele position ( ) once. 4. Use the zoom scroll wheel to zoom in and out. The zoom indicator and pan box appear on the screen. 5. Use the navigation buttons to pan across the image. 6.
Using the Delete button The camera is equipped with a quick Delete button for you to delete photos or videoclips without entering the Playback menu. To delete a photo or video: 1. Turn your camera to Playback mode. 2. Use the navigation buttons to select the photo/video clip you want to delete. 3. Press the button. The Delete screen appears. 44 4. Press the Up/Down navigation buttons to select Yes or No. Then press the button to confirm. Erased photos/video clips cannot be recovered.
USING THE MENUS Still menu Mode: In still shooting modes, press the to enter the Still menu. button 3. Use the Up/Down navigation buttons to select an option. 4. Press the button to confirm the setting and exit the menu. Refer to the following sections for more detailed information on each setting. To configure the settings: 1. Use the Up/Down navigation buttons to scroll through the menu items. 2. Press the Right navigation button to enter the submenu.
AF mode (Auto-Focus mode) Use this setting to control the auto-focus mechanism while taking pictures. 46 Two options are available: • Single-AF: The focus frame appears on the center of the LCD screen to focus on the subject. • Multi-AF: The camera automatically focuses the subject in a wide area to find the focus point. AF-assist beam Use this setting to aid focus in dark conditions. Select On to turn on the AF assist beam, or Off the disable the function.
Cont. AF (Continuous AF) Use this setting to turn On or Off the auto continuous focus function when shooting on a moving subject. Expo Metering (Exposure Metering) Use this setting to select an area for the exposure to be obtained.
Cont. Shot (Continuous shot) Use this setting to perform continuous shooting. Once in this mode, you must continuously hold the shutter button to use this function. • Time-Lapse : Automatically capture pictures in at predefined intervals. The flash is designed not to work in this mode in order to enable quick succession of shots. To enable this mode, the camera must be in continuous shot mode on self-timer as described on page 29.
Quick Review This setting refers to the quick photo review immediately after taking a picture. The picture stays on the LCD screen for an adjustable period of time. Three options are available: • 1 sec • 2 sec • 3 sec Digital Zoom Use this setting to enable or disable the digital zoom function. When disabled, only the optical zoom is enabled. Digital Zoom indicator • Off: gray color. • On: reddish color.
Histogram The histogram is used for checking the exposure while taking pictures. Use this setting to enable or disable the histogram display on the LCD screen. Slow Shutter Slow Shutter mode will keep the shutter open as long as you push down the shutter button. So, you are in complete control of the exposure. (The Slow Shutter setting is only available when the camera is in the Manual mode). • Manual: To set a long exposure time between 2~30 sec.
Movie menu Mode: In movie shooting mode, press the to enter the Movie menu. button 3. Use the Up/Down navigation buttons to select an option. 4. Press the button to confirm the setting and exit the menu. Refer to the following sections for more detailed information on each setting. Cont.AF (Continuous AF) See “Cont. AF“ section on page 47. To configure the settings: 1. Use the Up/Down navigation buttons to scroll through the menu items. 2. Press the Right navigation button to enter the submenu.
Expo Metering (Exposure Metering) See “Expo Metering“ section on page 47. 52 Stabilization See “Stabilization“ section on page 36.
Playback menu Mode: In playback mode, press the enter the Playback menu. button to To configure a setting: 1. Use the Up/Down navigation buttons to scroll through the menu items. 2. Press the Right navigation button to enter the setting. Refer to the following sections for more detailed information on each setting. Protect To prevent pictures or videos being erased accidentally, you can use this setting to lock one or all files.
To protect/unprotect a picture or video: 1. Turn your camera to Playback mode and display the picture or video that you would like to protect. 2. Select the Protect setting from the Playback menu as described previously. 3. Use the Up/Down navigation buttons to select One to protect this picture/video, or select All to protect all pictures/videos in the internal memory or memory card. Then press the Right navigation button. 4.
3. Use the Up/Down navigation buttons to select One, and press the Right navigation button. 4. Use the button to select Yes to confirm the deletion or Back to cancel. 5. Press the button to confirm the setting and exit the menu.
Info. Box (Information Box) Use this setting to enable or disable the text display for taking pictures. The following information will be displayed on the screen: histogram display, aperture value, shutter speed, exposure value, image size, image quality, and ISO value. (About the display icon please refer to page 31). 56 Trim The trim setting allows you to trim a picture to adjust the part that you desired and save it as a new picture. To trim a picture: 1.
3. Press the Shutter button to save what you see on the LCD screen as a new picture, or the button to cancel and return to the Playback menu. Resize This setting allows you to resize picture to a specified resolution, and save it as a new picture. 1. Select the Resize setting from the Playback menu as described previously. 2. Use the Left/Right navigation buttons to select a picture to resize. 3.
Playback menu as described previously. 2. Use the Left/Right navigation buttons to select a picture to rotate. Slide show This setting allows you to view all the stored pictures as a slideshow. 1. Select the Slide show setting from the Playback menu as described previously. 2. Use the Up/Down navigation buttons to select Effect, Interval time, or Repeat and use the Left/Right navigation buttons to adjust the setting. 3.
to select Start to run the slideshow or Cancel to return to the Playback menu. 4. Press the button to confirm the setting. Red-eye removal Use this setting to remove red-eye effect in your photos. 1. Select the Red-eye removal setting from the Playback menu as described previously. 2. Use the Left/Right navigation buttons to select the image for which red-eye will be removed. 3. Use the Up/Down navigation buttons to select Yes to fix the selected image or back to cancel and return to the Playback menu. 4.
Setup menu Mode: The Setup menu is available in all modes. Press the button in any modes, then use the navigation buttons to select the Setup menu. 2. Press the Right navigation button to enter the setting. Refer to the following sections for more detailed information on each setting. Format Memory The format function allows you to erase all data in the memory card, and internal memory including the protected pictures and video clips. 60 To configure the settings: 1.
1. Select the Beep setting from the Setup menu as described previously. 2. Use the Up/Down navigation buttons to switch between volume, shutter tone, key tone, self-timer tone, and power tone fields. 3. The current media is formatted. Beep Use this setting to adjust the volume of beep when buttons are pressed and change the tones for shutter, buttons, self-timer, and power-on/power-off. To change this setting: 3. Use the Left/Right navigation buttons to adjust the volume and change each tone style.
LCD Brightness Use this setting to adjust the brightness of your LCD screen. 1. Select the LCD Brightness setting from the Setup menu as described previously. 2. Use the Left/Right navigation buttons to adjust the brightness level. Then press the button to confirm. 62 Power Saver This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn off the LCD screen and camera automatically after a period of inactivity. 1.
3. Use the Left/Right navigation buttons to specify the idle period before automatic power-off. The level bars correspond to the following idle periods. • LCD off: 30 seconds, 1 minute, 2 minutes, and Always on. • Camera off: 3 minutes, 5 minutes, 10 minutes, and Always on. 4. Press the button to confirm. to display the local time on the LCD screen while you are overseas. 1. Select the World time setting from the Setup menu as described previously. The world time screen appears. 2.
File Numbering After capturing photos or videos, the camera will automatically save the file with a numeric suffix. You can use this setting to determine whether the number should continue on from the last photo you have taken, or reset the counter to 1 and save files in a new folder in the memory card. 1. Select the File numbering setting from the Setup menu as described previously. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the button to confirm.
select NTSC or PAL. Then press the button to confirm. Copy to Card (Copy internal memory to memory card) Use this setting to copy the files stored in the internal memory to the memory card. 1. Select the Copy to memory card setting from the Setup menu as described previously. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the button to confirm. The video output signal can be switched to NTSC or PAL to accommodate different regional standards.
Reset Settings Use this setting to restore the camera to its default settings. 1. Select the Reset setting from the Setup menu as described previously. 2. Use the Up/Down navigation buttons to select Yes or No. Then press the button to confirm. 66 FW Ver. (Firmware version) Use this setting to view the current camera firmware version. 1. Select the FW Ver. setting from the Setup menu as described previously.
CONNECTIONS Connecting to a TV You can connect your camera to your television, computer, or printer to view pictures you have taken. By using the AV cable, you can view the captured images on a TV. Follow the steps below to connect the supplied AV cable to a TV. 1. Choose [NTSC] or [PAL] to match your TV video standard (see page 74) and then turn off the camera. 2. Connect one end of the AV cable to the USB/AV OUT port on your camera. 3.
Connecting to a PC Use the USB cable and ArcSoft software (CDROM) supplied with your camera to copy (transfer) pictures to a computer. Setting the USB mode Since the camera’s USB port can be set to connect with either a PC or a Printer, the following steps will allow you to ensure that the camera is correctly configured to connect with a PC. 1. Press the button and use the Up/ Down navigation buttons to select USB Connect, and then press the Right navigation button. 2.
By using the USB cable, you can transfer the captured photos and videos to a PC. Follow the steps below to connect the camera to a PC. 1. Start a computer to which ArcSoft software has been installed. 2. Make sure both the camera and PC are turned on. 3. Connect one end of the supplied USB cable to the USB/AV OUT port on your camera. 4. Connect the other end of the cable to an available USB port on your PC. 5. Disconnect the camera once transfer is complete.
Window 2000 Professional Click the [Unplug or Eject Hardware] icon ( in the taskbar and select [Stop USB Mass Storage Device] from the menu displayed. Macintosh Drag the untitled icon to the Trash.
Connecting to a PictBridge compatible printer PictBridge allows printing images from a memory card in a digital camera directly to a printer, regardless of brand. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the manual for specifications.With the PictBridge function on your camera, you can print the captured photos directly with a PictBridge compatible printer using the supplied USB cable, without the need for a PC.
Connecting the camera and printer. 1. Make sure both the camera and printer are turned on. 2. Connect one end of the supplied USB cable to the USB port on your camera. 3. Connect the other end of the cable to the USB port on the printer. 72 If the camera is not connected to a PictBridge compatible printer, the following error message appears on the LCD screen.
Using the PictBridge menu After setting the USB mode to Printer, the PictBridge menu appears. Print with date If you have set the date and time of your camera, the date record would be saved with the photos you take. You can print the photos with date by following the steps below. 1. Select Print with date from the PictBridge menu. The following screen appears. Use the Up/Down navigation buttons to select a menu item, and press the Right navigation button to enter.
2. Use the Left/Right navigation buttons to scroll through the photos. 3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo. 4. Press the button and the following screen appears. 5. Select Yes to confirm printing, or No to cancel. Then press the button. 74 Print without date Use this setting to print the photos without dates on them. 1. Select Print without date from the PictBridge menu. The following screen appears. 2.
displayed image. 4. Press the button and the following screen appears. Print index You can use this setting to print all indexes to show all the photos currently in your camera. 1. Select Print index from the PictBridge menu. The following screen appears. 5. Select Yes to confirm printing, or No to cancel. Then press the button. 2. Select Yes to confirm the printing, or No to cancel. Then press the button.
Print DPOF (Digital Print Order Format) To use DPOF printing, you must make the selection of photos for printing using the DPOF settings before hand. See “DPOF” section on page 52. 1. Select Print DPOF from the PictBridge menu. The following screen appears. Exit To exit the PictBridge menu, select Exit. The “Remove USB cable” message will be displayed. Disconnect the USB cable from the camera and printer. 2. Select Yes to confirm the printing, or No to cancel. Then press the button.
Appendices Specifications : H855 "Design and specifications are subject to change without notice." Effective Image Sensor Pixels 8.0 Megapixels Image Sensor 8.5 Megapixels [1/2.5” (CCD)] Focal Length F = 4.67mm(Wide) ~ 23.35mm(Tele) [35mm film equivalent] [28mm (Wide) ~ 140mm (Tele)] Lens F number F3.3 (Wide) ~ F4.
Number of Still Image Recording (See page26) Pixels Movie Image Compression H855 : 8MP, 7MP (3:2), 6MP (16:9), 5MP, 3MP, 2MP, 1MP, 0.3MP 640x480pixels: 30fps/15fps, 320x240pixels: 30fps/15fps Best, Fine, Normal DCF, DPOF (Ver1.1) Support Yes File Format 78 Still Image Exif 2.2 (JPEG) Movie Image Compression: MPEG4, Audio: G.
ISO Sensitivity Auto, ISO 80/100/200/400/800/1600 AF Method Single AF, Multi-AF (TTL 9-point), Face-Detection, AF Assist Beam (On/Off) Light Metering Method Artificial Intelligence AE (Ai AE), Center-weighted Average, Spot (Fixed to center of frame) Exposure Control Method ProgramAE (AE-lock available) Exposure Compensation ±2 EV in 1/3 steps Shutter Speed 4 ~ 1/2000 second (Manual 30 seconds) Continuous Shooting Approx. 2.
Auto/Red-Eye Reduction/Forced Flash/No Flash/ Slow Synchro/Red-Eye Reduction+Slow Synchro Internal Flash (Shooting Gno. 6.5 (ISO 100) Range) (Shooting Range) Wide: Approx. 0.3m~3.9m / Tele: Approx. 0.3m~2.6m (ISO 400) Recording Media 80 Internal Memory: 26MB SD Card/SDHC Card (Up to 4GB support) Other Features PictBridge, ExifPrint Support, Multi-language Support (11 languages) Jacks USB2.0/AV-OUT (Integrated Proprietary Connector), DC-IN 3.
Error messages Messages No card Card error Card full Write protect Picture error No picture Lens error System error No sound file Image cannot be saved Explanation • The memory card is not inserted. • The memory card is not formatted. (See P.60) • The memory card is full and cannot store any new images. • The memory card is write-protected. • The picture is not captured correctly. • The picture is damaged. • There are no images in the memory card or in the internal memory.
Messages Explanation Card is not formatted, format? • Confirm whether the memory card should be formatted. This image cannot be deleted • The picture or video you are trying to delete is protected. Cannot record movie • The write protection switch in the memory card is set to the “LOCK” position. Sound file cannot be saved • The write protection switch in the memory card is set to the “LOCK” position. Warning!! Camera recording, • No other actions allowed to perform during video/audio please wait.
Troubleshooting Problem Camera does not turn on. Possible causes • The battery has run out. • The battery is not inserted correctly. Solution • Charge the battery or replace with a fully charged battery. • Re-insert the battery observing the correct polarity. Camera turns off suddenly • The battery has run out. during operation. • Charge the battery or replace with a fully charged battery. The picture is blurred. • The lens is dirty. • appears when taking pictures.
Problem 84 Possible causes Solution No picture is taken when pressing the shutter button. • The memory card is full. • No available space to store the files. • The mode dial is in Playback mode. • Replace the memory card with a new one or clean off current memory card. • Delete unwanted images. • The memory card is locked. • Turn the mode dial to any still shooting mode. Images cannot print from the connected printer. • The camera is not connected to the printer correctly.
