Product Manual

Using Vscan gateway software
Vscan – User Manual 4-31
GM092207 02
The Software page in the Setup screen is displayed
showing the available software update for the selected
device.
2. Select the Vscan gateway software device and press
Install.
The Vscan gateway software is closed and a confirmation
window is displayed.
3. Press OK.
The installation process is started.
4. On the last screen, check the option I would like to launch
Vscan gateway software and press Finnish.
The new version of Vscan gateway software is started.
NOTE: Press Setup , select the Software page and press Delete to
remove the software upgrade that has been installed.
NOTE: The procedure for software update installation from a CD is
similar to the procedure described above.
Vscan unit software update
1. Place the Vscan on the Docking station. Open the display
2. Press Update available.
The Software page in the Setup screen is displayed
showing the available software update.
3. Select the Vscan device and press Install.
An information window is displayed. Make sure to follow all
the recommendations listed: