Product Manual

Vscan gateway software
4-18 Vscan – User Manual
GM092207 02
Connection of Vscan to a computer
Figure 4-1. Connection setup
1. Place the Vscan on the Docking station.
NOTE: Plug the AC/DC adapter into the electrical outlet to avoid
loss of power during image viewing.
2. Open the display to start the Vscan device.
3. Connect Docking station to the computer using the USB-2
cable.
4. Double-click the Vscan gateway software icon on the
computer desktop to start the application.
CAUTION
Accessory equipment connected to the analog and digital
interfaces must be certified according to the respective IEC
standards (e.g. IEC60950 for data processing equipment and
IEC60601-1 for medical equipment). Furthermore all complete
configurations shall comply with the valid version of the system
standard IEC60601-1-1. Anybody who connects additional
equipment to the signal input part or signal output part of Vscan
configures a medical system, and is therefore responsible that
the system complies with the requirements of the valid version
of IEC60601-1-1. If in doubt consult the technical service
department or your local representative for GE .