Product Manual

Using Vscan
3-4 Vscan – User Manual
GM092207 02
Coupling gels should not contain the following ingredients as
they are known to cause probe damage:
• Methanol, ethanol, isopropanol, or any other alcohol-based
product
• Mineral oil
• Iodine
• Lotions
• Lanoline
• Aloe Vera
• Olive Oil
• Methyl or Ethyl Parabens (para hydroxybenzoic acid)
• Dimethylsilicone
The following gels have been tested to be compatible with the
Vscan.
Other recommendations
Like most high frequency computing devices, the electronic
components of Vscan will generate some heat while operating
normally and as intended. Vscan is equipped with safety
mechanisms which will automatically reduce computing speed
(frame rate), and ultimately shut down the device, before any
risk of overheating occurs. Vscan is verified to comply with
harmonized safety standards (see ‘Conformance Standards’ on
page i-1), under any operating condition described in this user
manual (see Environmental properties on page i-3). To help
keeping the Vscan operating temperature at an optimal
functional level, and to ensure longer scanning time with
maximum frame rate, it is recommended to hold the Vscan so
that there is good contact between the device and the hand.
Image display on Vscan is dependent of the ambient light, avoid
direct sun light on the display when scanning and reviewing
images.
Aquasonics 100 Parker Laboratory Inc.
Clear Image Sonotech Inc.
Scan Parker Laboratory Inc.
Sonogel Sonogel Vertriebs