Product Manual

Safety
7-8 Vscan – User Manual
GM092207 02
To avoid injury
• Do not remove the Vscan's protective covers. No
user-serviceable parts are inside. If servicing is required,
contact GE service.
• Do not spray or place liquids on or above the Vscan.
Conductive fluids seeping into the active circuit components
may cause short circuiting, which could result in an electrical
fire.
Pacemaker hazard
The possibility of the system interfering with pacemakers is
minimal. However, as this system generates high frequency
electrical signals, the operator should be aware of the potential
hazard this could cause.
Electrical safety
Device classifications
The Vscan is an internally powered device, type BF.
The AC/DC adapter is Class II.
External Connection
CAUTION
Connection to a PC can be done when the PC is in compliance
with the IEC standard EN 60950 (Data processing equipment).
The computer connected to Vscan must be kept outside the
patient environment (refer to local regulation and EN 60601-1).