Product Manual

Reinstallation of the factory software
Vscan – User Manual 6-7
GM092207 02
Reinstallation of the factory software
A microSD card with the factory software is provided in a sealed
envelope in case a clean re-installation of the factory software is
required.
Procedure
1. Make sure the battery is fully charged.
2. Remove the Archive
microSD card from the Vscan (see
page 2-17).
3. Insert the Factory software
microSD card in the Vscan (see
page 2-18).
4. Place Vscan on the Docking station and make sure that the
power supply is connected to the Docking station.
5. Open the display to start the Vscan.
After about 30 seconds, the Consult user documentation
screen is displayed.
6. Press Store and Color simultaneously to start the
installation.
CAUTION
IMPORTANT!
Reinstallation of the factory software should only be done
in agreement with service.