Product Manual

Inspection
Vscan – User Manual 6-3
GM092207 02
Inspection
Inspecting the Vscan
Examine the following on a monthly basis (or whenever there is
a reason to assume that any issue may have occurred):
• Connectors on cables, for any mechanical defects
• Entire length of electrical cables, for cuts or abrasions
• Equipment, for loose or missing hardware
Inspecting the probe
Before each use
1. Inspect the lens, the probe housing and the cable.
2. Look for damage that might allow liquid into the probe.
3. Test the functionality of the probe.
CAUTION
If any defects or damages are found on the control unit, the
probe or its cable, DO NOT use the Vscan. Contact GE
service.
WARNING
To avoid electrical shock hazard, do not remove covers from
the Vscan.
CAUTION
If any defects or damages are found on the probe or its cable,
DO NOT use the Vscan. Contact GE service.