Installation Guide

TYPICAL INSTALLATIONS
(Mounting Hardware/Supports by others)
Dummy (non-powered) end lowers for relamping clearance
which is required when fixtures are mounted in close
proximity. Flexible mounting provides free swing and impact
protection.
1. Splice Box/Fixture Hanger
2. Flexible Pendant Hanger
3. Union
4. Rigid Support
5. Support Hook
NOTE: Leave extra links to support fixture in relamping
positions.
Rigid mounted for installations where relamping can be
accomplished without lowering dummy end.
1. Splice Box/Fixture Hanger
2. Union
3. Rigid Support
Dummy (non-powered) end lowers for relamping clearance
which is required when fixtures are mounted in close
proximity.
1. Splice Box/Fixture Hanger
2. Swivel Hanger
3. Union
4. Rigid Support
5. Support Hook
6. Conduit Nipple
NOTE:Leave extra links to support fixture in relamping
position.
35-201578-P9 (11/08)
g
GE Lighting Solutions is a subsidiary of the General Electric Company. Evolve and other trademarks belong to GE Lighting Solutions. The GE brand and logo are trademarks of the General Electric Company.
© 2011 GE Lighting Solutions. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
16943533----888