Use and Care Manual

REQUIRED Supply Needed
n Teflon
®
Tape
CONTENTS INCLUDED
WITH PRODUCT
n Shower Unit
n Filter
n Owner’s Manual / Install
Instructions
PARTS LIST
Ref. No. Part No. Part Description
001 GXSM01TBL Shower Filter System (includes filter)
002 FXSCT Replacement Filter
0999 49-6000284 Owner’s Manual / Install Instructions
For replacement parts and pricing in the U.S: 800-952-5039 (US)
SPECIFICATION GUIDELINES
Model Service
Flow Rate
Service
Life
Pressure Temperature
Range
GXSM01TBL 2.0 GPM
(7.6 LPM)
6 months* 20-100 psi
(1.4-6.9 bar)
40 - 120 °F
(4-48.9°C)
*Filter life varies with local water conditions.
49-6000284 Rev. 0 07-22 GEA
GEAppliances.com
GE Appliances, a Haier company
SAFETY PRECAUTIONS
n Check with your state and local public works department
for plumbing and sanitation codes. You must follow these
guidelines as you install the Household Water Filtration
Housing. Using a qualified installer is recommended.
n Be sure the water supply conforms with the Specifications
Guidelines. If the water supply conditions are unknown,
contact your municipal water company .
n Your Water Filtration System will withstand up to 100
pounds per square inch (psi) water pressure. If your
house water supply pressure is higher than 100 psi, install
a pressure reducing valve before installing the Water
Filtration System.
WARNING
The system is not intended to be
used as a drinking water
treatment unit.
Discard all unused and packaging material after
installation. Small parts remaining after installation could
be a choice hazard.
n It is highly recommended that a water shut-off valve be
placed directly upstream of your household filter.
Your new GE Appliances shower filter comes complete with all the necessary hardware for most installations. Each filter gives
you up to 6 months of filtered water. The filter should be changed after 6 months of use or 16,000 gallons, whichever comes first.
This system is Tested and Certified by IAPMO R&T
against NSF/ANSI Standard 177 for the reduction of
the claims specified on the Performance Data Sheet
and at iapmort.org.
Shower Filter
GXSM01TBL
Owner’s Manual and
Installation Instructions
INSTALLATION INSTRUCTIONS
NOTE:
• The showerhead filter chrome is pre-assembled, and it is not
necessary to disassemble in order to install.
• GXSM01TBL does not come with a showerhead.
1. Remove existing shower head from shower pipe.
2. Apply Teflon® Tape to shower pipe threads and Showerhead Filter
threads, if necessary.
3. Place Showerhead Filter on shower pipe, turning clockwise until
secured.
4. Place existing shower head (not provided with PB-SFC) onto
Showerhead Filter threads, turning clockwise until secured.
5. Turn on water and check connection of Showerhead Filter and
Showerhead for leaks.
NOTE: Add Teflon
®
tape to shower pipe threads and tighten as
appropriate.
6. Flush unit by allowing water to flow through for a few minutes, until
water clears.
NOTE: When the filter is used for the first time, some carbon fines
may appear in the water.
Swivel collar
Shower pipe
Shower head*
Remove the label
*Shower head not included.