Specification Sheet

LED Signal Modules
• 8 and 12 inch
Mechanical Outline
Dimensions in inches [mm]
GE Lighting Solutions • 1-888-MY-GE-LED • www.gelightingsolutions.com
1 - 8 8 8 - 6 9 - 4 3 - 5 3 3
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. GTx is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric
Company. © 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
TRAF192-R042513
Front View Back View
R 275
10.8
297
11.7
Front View
64
2.5
264
10.4
77
3
Side View Back View
8 inch 12 inch
61
2.4
51
2.01
174
6.9
208
8.2
186
7.3
Side View
Distributed by:
Operating Specifications
Parameter Rating
Operating Temperature Range* -40 to +74°C (-40 to +165°F)
Operating Voltage Range 80 to 135 V (60Hz AC)
Power Factor (PF) > 90%
Total Harmonic Distortion (THD) < 20%
Minimum Voltage Turn-Off (VTO) 35 V
Turn-On / Turn-Off Time < 50 ms
Lens & Shell Material UV Stabilized Polycarbonate
Wiring
40 in, 18 AWG, Color Coded
with Strain Relief
Dimming Option
2
As per Section 5.8 of ITE VTCSH -
LED Circular Signal Supplement-
June 2005
* Operating Temperature Range per ITE 2005, Section 3.3.2
Design Compliance
Test type Compliance
ITE VTCSH-
Luminous Intensity
LED Circular Signal Supplement -June 2005
Chromaticity
ITE VTCSH-
LED Circular -June 2005
Moisture Resistance
Blown Wind Rain MIL-STD-810F
method 506.4
Mechanical Vibration MIL-STD-883 Method 2007
Electronic Noise FCC Title 47 Sub. B Sec 15
1
Sec. 2.1.6 NEMA TS2-2003, 300V, 2500W
Transient Voltage Protection Sec. 2 .1.6 NEMA TS2-2003, 600V, 10µF
Sec. 2.1.8 NEMA TS2-2003, 1kV, 2Ω
Controller Compatibility
ITE VTCSH-
LED Circular Signal Supplement -June 2005
Wiring NFPA 70, National Electric Code
Sec. 8.2 IEC 61000-4-5 & Sec. 6.1.2 ANSI/IEEE
Transient C62.41.2 - 2002, 3KV, 2 Ω
Suppression Sec. 8.0 IEC 61000-4-12 & Sec. 6.1.1 ANSI/IEEE
C62.41.2 - 2002, 6KV, 30 Ω
Standard product equipped with universal connectors
(insulated spade-quick disconnect).
All lamps available in tinted or clear lens.
1
Class A
2
Customer controller and load switch compatibility
testing may be required. Please contact you GE
representative for details.
3
Power consumption for DR6-RTFB-77A,
DR6-RCFB-77A, DR6-YTFB-77A, DR6-YCFB-77A,
DR4-RTFB-77A, DR4-RCFB-77A, DR4-GTFB-77A and
DR4-GCFB-77A could slightly increase over time to
ensure light degradation compensation.
4
Measured at vertical angle of -2.5° and
at horizontal angle of 0°.
Product Information
Nominal Nominal Nominal Minimum
Model Number Front Shell Size AC Voltage Power
3
Wavelength Maintained
(in) (W) (nm) Intensity
4
(Cd)
•
DR4-RTFB-77A Tinted
8 120V – 60Hz 7 626 165
DR4-RCFB-77A Clear
•
DR4-YTFB-77A Tinted
8 120V – 60Hz 9.5 589 410
DR4-YCFB-77A Clear
•
DR4-GTFB-77A Tinted
8 120V – 60Hz 6.5 503 215
DR4-GCFB-77A Clear
•
DR6-RTFB-77A Tinted
12 120V – 60Hz 6.7 625 365
DR6-RCFB-77A Clear
•
DR6-YTFB-77A Tinted
12 120V – 60Hz 10.5 589 910
DR6-YCFB-77A Clear
•
DR6-GTFB-77A Tinted
12 120V – 60Hz 9.1 502 475
DR6-GCFB-77A Clear