Specification

ManualsBrandsGE ManualsAppliances7.2 cu. ft. vented Electric Dryer in White with Auto Dry and 120ft Venting

22 1/2"

29 1/2"

26"

3 1/2"

1 3/4"

3 1/4"

37 1/2"

44"

27"

Power Cord 4 1/2"

11 3/4"

Side View

Rear View

GTD38EASWWS

GE® 7.2 cu. ft. Capacity Electric Dryer with up to 120 ft. Venting and Reversible Door

ELECTRIC DRYER RATING:

240V 5600W 24A 60Hz

208V 4400W 22A 60Hz

EXHAUST OPTION: 4-way rear, right, left and bottom

CIRCUIT REQUIREMENTS: An individual, properly-grounded

branch circuit, protected by a 30-amp circuit breaker or

a time-delay fuse, is required.

NOTE: Dryer wall outlet must be located within 36" of service

cord entry and accessible when dryer is mounted in position.

INSTALLATION INFORMATION:

For complete information, see installation instructions packed

with your dryer.

SPECIAL INSTALLATION REQUIREMENTS

ALCOVE OR CLOSET INSTALLATION:

- If your dryer is approved for installation in an alcove or closet,

it will be stated on a label on the dryer back.

- The dryer MUST be exhausted to the outside.

- Minimum clearances between dryer cabinet and adjacent walls

or other surfaces are: 0" either side; 1" front, top and rear

- Closet doors must be louvered or otherwise ventilated and must

contain a minimum of 60 sq. in. of open area equally distributed.

If this closet contains both a washer and a dryer, doors must

contain a minimum of 120 sq. in. of open area equally distributed.

- No other fuel-burning appliance shall be installed in the same

closet with a gas dryer.

DIMENSIONS AND INSTALLATION INFORMATION

(IN INCHES)

Speciﬁcation Revised 02/24

*Order online at GEApplianceparts.com, 24 hours a day or by phone at 877.959.8688 during normal business hours.

For answers to your Monogram, Café™, GE Proﬁle™ or GE Appliances product questions, visit our website

at geappliances.com or call GE Answer Center® Service, 800.626.2000.

Listed by

Underwriters

Laboratories

BATHROOM OR BEDROOM INSTALLATION:

- The dryer MUST be exhausted to the outdoors.

- The installation must conform with the local codes,

or in the absence of local codes, with the National Electric

Code and National Fuel Gas Code, ANSI Z223 for gas dryers.

MINIMUM CLEARANCES OTHER THAN ALCOVE

OR CLOSET INSTALLATION:

- Minimum clearances to combustible surfaces are:

0" both sides; 1" rear.

DRYER EXHAUSTING INFORMATION

Use metal duct only, vertical and horizontal ducting.

Summary of content (4 pages)

PAGE 1
GTD38EASWWS GE® 7.2 cu. ft. Capacity Electric Dryer with up to 120 ft. Venting and Reversible Door DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES) 22 1/2" 29 1/2" 27" Power Cord 4 1/2" 26" 11 3/4" ELECTRIC DRYER RATING: 240V 5600W 24A 60Hz 208V 4400W 22A 60Hz EXHAUST OPTION: 4-way rear, right, left and bottom CIRCUIT REQUIREMENTS: An individual, properly-grounded branch circuit, protected by a 30-amp circuit breaker or a time-delay fuse, is required.
PAGE 2
GTD38EASWWS GE® 7.2 cu. ft. Capacity Electric Dryer with up to 120 ft. Venting and Reversible Door FOR COMPLETE INFORMATION, SEE INSTALLATION INSTRUCTIONS PACKED WITH YOUR DRYER. DUCTING MATERIALS: For best performance, this dryer should be vented with 4" diameter all-rigid metal exhaust duct. If rigid metal duct cannot be used, then UL-listed flexible metal (semi-rigid) ducting can be used (Kit WX08X10077).
PAGE 3
GTD38EASWWS GE® 7.2 cu. ft. Capacity Electric Dryer with up to 120 ft. Venting and Reversible Door FEATURES AND BENEFITS Auto Dry – Auto Dry monitors the internal air temperature to determine the ideal drying time, protecting your garments from overdying. Powerful Venting & Flexible Installation – Powerful airflow offers long-lasting performance from lint buildup and offers venting solutions up to 120 feet for greater installation flexibility .
PAGE 4
GTD38EASWWS GE® 7.2 cu. ft. Capacity Electric Dryer with up to 120 ft.