Specification

GRS500PV
GE
®
500 Series 30" Slide-in Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
For answers to your Monogram, GE Café
™
, GE Profile
™
or GE Appliances product questions, visit our website
at geappliances.com or call GE Answer Center
®
Service,
800.626.2000.
Specification Revised 4/23
All GE ranges are equipped
with an Anti-Tip device. The
installation of this device is an
important, required step in the
installation of the range.
Listed by
Underwriters
Laboratories
ADA
COMPLIANT
KW RATING
240V 12.1
208V 9.1
BREAKER SIZE
240V 40 Amps
†
208V 40 Amps
†
†
NOTE: Check local codes
for required breaker size.
RECEPTACLE LOCATIONS: Locally approved
flexible service cord or conduit must be used
because terminals are not accessible after range
installation.
See shaded area in drawing for
location of electrical outlet box. Recommended
outlet locations allow range to be installed directly
against rear wall.
NOTE: This appliance has been approved for 0"
spacing to adjacent surfaces above the cooktop.
However, a 6" minimum spacing to surfaces less
than 15" above the cooktop and adjacent cabinet
is recommended to reduce exposure to steam,
grease splatter and heat.
INSTALLATION INFORMATION: Before installing,
consult installation instructions for current
dimensional data and additional requirements.
0"
Minimum
to cabinets
below
cooktop
30"
(see note)
0" minimum
to cabinets
above
counter
30"
0" Right side
0
" Left side
Minimum
to side wall
36"
30"
3 1/4"
Wall-mounted
Recommended
6 1/2"
24"
23 3/4"
3 1/8"
Side Wall
Electrical
supply
NOTE: Minimum to bare cabinet above;
see Installation Instructions for alternate
installation configurations.
30"
5/8"
28
5
⁄
8
"
with handle
35
5
⁄
8
"
to
36
1
⁄
2
"
NOTE: Rear
wall to front of
door glass.
26
1
⁄
4
"
w/o handle
48
1
⁄
4
"