Specification

GRF600AV
GE
®
600 Series 30" Free-Standing Electric Range
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
All GE Appliances ranges are equipped
with an Anti-Tip device. The installation
of this device is an important, required
step in the installation of the range.
Listed by
Underwriters
Laboratories
For answers to your Monogram, Café™, GE Profile™ or GE Appliances
product questions, visit our website at geappliances.com or
call GE Answer Center® Service, 800.626.2000.
Specification Revised 1/24
RECEPTACLE LOCATIONS: Locally approved flexible
service cord or conduit must be used because terminals
are not accessible after range installation. See shaded
area in drawing for location of electrical outlet box.
Recommended outlet locations allow range to be
installed directly against wall.
NOTE: This appliance has been approved for 0"
spacing to adjacent surfaces above the cooktop.
However, a 6" minimum spacing to surfaces less
than 15" above the cooktop and adjacent cabinet is
recommended to reduce exposure to steam, grease
splatter and heat.
INSTALLATION INFORMATION: Before installing,
consult installation instructions for current
dimensional data and additional requirements.
†
NOTE: Check local codes for required
breaker size.
KW RATING
240V 12.5
208V 9.4
BREAKER SIZE
240V 40 Amps
†
208V 40 Amps
†
0"
Minimum
to cabinets
below
cooktop
30"
(see note)
30"
0" Right side
0" Left side
Minimum
to side wall
36"
30"
3 1/4"
Wall-mounted
Recommended
6 1/2"
24"
23 3/4"
3 1/8"
Side Wall
Electrical
supply
NOTE: Minimum to bare cabinet above;
see Installation Instructions for alternate
installation configurations.
30"
NOTE: Rear wall to
front of door glass.
w/o handle
with handle
47 1/2"
27 7/8"
25 1/2"
10 3/4"
35 5/8"
to
36 1/2"
0" minimum
to cabinets
above
counter